PDA

View Full Version : faint coloured


Custom Search


spidar
02-22-2017, 05:21 PM
Konica Minolta c452
I have this faint band in 4 colours test.

Synthohol
02-22-2017, 11:34 PM
there is a setting for adjusting transfer voltage of trail edge.

http://www.copytechnet.com/forums/attachment.php?attachmentid=35711&d=1487802747

blackcat4866
02-22-2017, 11:37 PM
Is you faint area in which direction on which size paper? =^..^=

Synthohol
02-22-2017, 11:50 PM
good question!
i just assumed it was the trailing edge from memory of that image.

spidar
02-23-2017, 09:01 AM
Is you faint area in which direction on which size paper? =^..^=

A4 & bigger than A4

Synthohol
02-23-2017, 01:04 PM
the stripe, is it in the feed or cross direction was the question.

myster
02-24-2017, 09:15 AM
It may be dirt in the optics of the laser, it has to be disassembled and cleaned well

copier addict
02-24-2017, 02:07 PM
If it is on all colours, I would suspect the transfer belt or roller. Also, use the magic wand on the inside of the door to clean the printheads.

blackcat4866
02-24-2017, 09:38 PM
I can wait for the details. =^..^=

M3HR4N
10-28-2017, 01:44 PM
I've got the same problem, change anything you name it but no luck.

insigniawales
10-28-2017, 04:00 PM
Could be the media type. If the weight of the paper is greater thatn 80gsm it could cause banding as described. You can adjust the 2nd transfer voltages in service mode

Sent from my SM-G903F using Tapatalk

Custom Search