PDA

View Full Version : CQ Biz Hub 658e


Custom Search


antone
10-24-2019, 12:29 AM
Brand new out the box!All trays paper goes up to fuser and folds up! Checked senors and run motors and they are good ! Any help would B nice!

Sent from my SM-N950U using Tapatalk

blackcat4866
10-24-2019, 12:57 AM
So does it jam? What jam code?
Does it error out? What error?

I think we'll need just a little more than that. =^..^=

Woxner
10-24-2019, 04:23 AM
did you run the fuser drive motor and clutch. bad clutch will do this. had a new c458 do this. also there is a bd just above the mfp on the right called excb that could be bad

mo0651
10-24-2019, 11:33 PM
On the door that swings open, there is a push arm that goes thru the frame of copier on rear side just below the fuser. This arm pushes on a spring loaded lever behind frame.
We have had a couple of machines where that lever was broken and/or popped out of place. causing this issue. Worth a look. It is part of the fuser drive pack.

antone
10-25-2019, 04:22 AM
Is there a way to see the lever..at all?



Sent from my SM-N950U using Tapatalk

mo0651
10-25-2019, 02:59 PM
You have to get the door open all the way and look in little square hole. Take a pen and see if that lever inside works. Oh yeah you have to bend down and look in!:cool:

antone
10-30-2019, 02:10 AM
Found it works fine!Any thing else to look for. help!

Sent from my SM-N950U using Tapatalk

rrrohan
10-30-2019, 02:41 AM
still waiting on jam codes

antone
11-07-2019, 12:44 AM
Jam code 3003

Sent from my SM-N950U using Tapatalk

rrrohan
11-07-2019, 02:06 AM
Jam code 3003

Sent from my SM-N950U using Tapatalk

43959

blackcat4866
11-07-2019, 02:33 AM
My vote is for CL8 or PS3. In one case both. =^..^=

allan
11-07-2019, 05:43 AM
Does the sensor flag above the transfer roller pop back freely or plugged in?
But i think that would be J2002.

antone
11-08-2019, 12:57 AM
change the complete fuser drive unit today...no change! help

Sent from my SM-N950U using Tapatalk

antone
11-08-2019, 01:02 AM
also complete fuser!!

Sent from my SM-N950U using Tapatalk

antone
11-08-2019, 03:29 AM
did you run the fuser drive motor and clutch. bad clutch will do this. had a new c458 do this. also there is a bd just above the mfp on the right called excb that could be badchange that 2

Sent from my SM-N950U using Tapatalk

blackcat4866
11-08-2019, 03:20 PM
... and PS3? =^..^=

Custom Search