mrfuser
mrfuser
Service Manager
Last Activity: 1 day ago
Joined: 05-03-2007
Location:
-
If you find the right supplies they work as good as OEM. Been doing this for over 35 years and don't have any more problems than with OEM. Profit margin... -
C3326DW Generic Toner?
Has anyone found a good source for 3rd party toner for the Lexmark C3326DW units? I have a client with a few and the OEM toners are crazy expensive and... -
Ok, took a c3350 transfer unit and installed in the c3351. Worked perfect with no mods neededLeave a comment:
-
What if I wanna put a 3350 transfer belt into a 3351 do I need to modify anything?Leave a comment:
-
C3350 vs c3351 transfer belt
Anyone know the difference between the transfer belts on the c3351 vs c3350? They look the same -
Turned out the lines were on the charge roller. No idea why they appeared suddenly but cleaned the roller and all things related and replaced drum and...Leave a comment:
-
That’s just the thing all the imaging units looked perfect and the customer said they started right after they got a jam now that a jam
Now that...Leave a comment:
-
C659 fine lines
Fine lines just started up. Any ideas? Tried the set up again in ce mode . No change...You do not have permission to view this gallery.
This gallery has 1 photos. -
I had another firmware set that I installed and it worked fineLeave a comment:
-
Bizhub c300i won't boot all the way
We tried to update the firmware and all went fine, except MFP board said NG. Rebooted and now won't boot all the way! Tried formating the SSD physical...
No activity results to display
Leave a comment: