Fine lines just started up. Any ideas? Tried the set up again in ce mode . No change
-
You do not have permission to view this gallery.
This gallery has 1 photos. -
Did you print separate test pages for each color? If lines only when you print magenta test page I would look at magenta image unit as issue.
FYI, when machine needs to be setup again there will be blue lines evenly spaced apart. They are called "blue lines of shame"
-
Magenta IU going bad, open the front door and pull it out, should be somewhat obvious looking at the drum.Comment
-
That’s just the thing all the imaging units looked perfect and the customer said they started right after they got a jam now that a jam
Now that they told the truthComment
-
swap yellow and magenta drum and see if symptoms changeComment
Comment