Page 1 of 2 12 LastLast
Results 1 to 10 of 19
  1. #1
    Service Manager 5,000+ Posts
    BH C3110 disable replace imaging unit message

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    5,204
    Rep Power
    116

    BH C3110 disable replace imaging unit message

    Hi all,

    Is it possible to clear this message without replacing the IU chip or replacing the IU?

    On the C35 there was a bulletin that with a FW upgrade showed how to extend the life of the IU's to 167% which worked great.

    I have a C3110 that is printing perfectly but asking for the cyan IU to be replaced.
    Let us eat, drink, and be merry, because tomorrow we may die!

    www.copierfirmware.co.uk

  2. #2
    Technician Jonny's Avatar
    Join Date
    Nov 2011
    Posts
    11
    Rep Power
    19

    Re: BH C3110 disable replace imaging unit message

    Its in service mode you can extend the yields as you said.

    Its under "IU Yields Settings" change from Standard to Extension

    This should give you 167 %

  3. #3
    RTFM!! 2,500+ Posts allan's Avatar
    Join Date
    Apr 2010
    Location
    Centurion
    Posts
    4,323
    Rep Power
    94

    Re: BH C3110 disable replace imaging unit message

    You can get the reset chips.
    Whatever

  4. #4
    Service Manager 2,500+ Posts
    BH C3110 disable replace imaging unit message

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    north jersey
    Posts
    3,082
    Rep Power
    93

    Re: BH C3110 disable replace imaging unit message

    for reference...
    Attached Images Attached Images

  5. #5
    Junior Member
    Join Date
    Mar 2016
    Location
    Veendam
    Posts
    1
    Rep Power
    0

    Re: BH C3110 disable replace imaging unit message

    Hi,

    Where is the chip of the drum? I can't find it.
    The drum lifetime is 25.000 and then hes stops with printing.
    I was wonder if the chip can be removed and then can be printing further?

    Tanks.

  6. #6
    Service Manager 5,000+ Posts
    BH C3110 disable replace imaging unit message

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    5,204
    Rep Power
    116

    Re: BH C3110 disable replace imaging unit message

    Quote Originally Posted by Synthohol View Post
    for reference...
    I'm replying to my old post here, but this machine has the colour image units all showing 0% life remaining however its not showing a warning & is printing fine.

    I found this setting in CE mode (see pic below) with this enabled will the machine NEVER ask for the IU to be replaced!?

    IU remind.jpg
    Let us eat, drink, and be merry, because tomorrow we may die!

    www.copierfirmware.co.uk

  7. #7
    Service Manager 2,500+ Posts
    BH C3110 disable replace imaging unit message


    Join Date
    Sep 2005
    Location
    South Jersey
    Posts
    2,523
    Rep Power
    88

    Re: BH C3110 disable replace imaging unit message

    Quote Originally Posted by copier tech View Post
    I'm replying to my old post here, but this machine has the colour image units all showing 0% life remaining however its not showing a warning & is printing fine.

    I found this setting in CE mode (see pic below) with this enabled will the machine NEVER ask for the IU to be replaced!?

    IU remind.jpg
    Don't have many of the small bizhubs and always use the extend life feature but have never seen that screen in pic before. Haven't seen a 3110 but have a few C35's & C3100P's. Will check and see if I can find that setting on these models. Might be it's only on the newer C3110 and why I haven't seen it?

  8. #8
    KonicaMinolta Senior Tech 500+ Posts srvctec's Avatar
    Join Date
    Oct 2009
    Location
    Central Kansas
    Posts
    527
    Rep Power
    43

    Re: BH C3110 disable replace imaging unit message

    Quote Originally Posted by copyman View Post
    Don't have many of the small bizhubs and always use the extend life feature but have never seen that screen in pic before. Haven't seen a 3110 but have a few C35's & C3100P's. Will check and see if I can find that setting on these models. Might be it's only on the newer C3110 and why I haven't seen it?
    We have a bunch of these POS machines and I've never seen that setting. Wonder what the exact path to that setting is.
    Started in the copier service business in the fall of 1988 and have worked at the same company since then, now the senior tech, since 2000.

  9. #9
    Service Manager 5,000+ Posts
    BH C3110 disable replace imaging unit message

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    5,204
    Rep Power
    116

    Re: BH C3110 disable replace imaging unit message

    Quote Originally Posted by srvctec View Post
    We have a bunch of these POS machines and I've never seen that setting. Wonder what the exact path to that setting is.
    I totally agree such a POS model.

    I updated the firmware & after was scrolling through the CE menu & found that option.


    Let us eat, drink, and be merry, because tomorrow we may die!

    www.copierfirmware.co.uk

  10. #10
    Senior Tech 250+ Posts
    Join Date
    Dec 2009
    Posts
    392
    Rep Power
    35

    Re: BH C3110 disable replace imaging unit message

    Also never see this option before.
    Maybe FW version you put is the key, if you share that info?

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here