Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6
  1. #1
    Junior Member
    700i error 077-123


    Join Date
    Sep 2012
    Posts
    9
    Rep Power
    0

    700i error 077-123

    I am getting this code repeatedly, when it happens the paper is just shy of entering the fuser - right at the trailing edge of the rubber belt feeding it into the fuser section. It will feed 2 sheets OK then stop on the third sheet. Always stops the sheet in the exact same position.
    Printing on 11x17 sheets tried feeding from 3 different trays. Occurs on both single side and duplex printing. I tried blowing off the sensors at the front and back of that section.
    Is there something specific I can try in component control to narrow it down?

  2. #2
    Junior Member
    700i error 077-123


    Join Date
    Sep 2012
    Posts
    9
    Rep Power
    0

    Re: 700i error 077-123

    Still battling this problem . . . I am able to run 8.5x11 sheets fine, but 17" jams every time. Heavier stock might get a few sheets through before jamming, text weight will jam every time

  3. #3
    Service Manager 1,000+ Posts
    700i error 077-123

    adriansto's Avatar
    Join Date
    Nov 2007
    Location
    Somewhere in Europe near Black Sea
    Posts
    1,893
    Rep Power
    53

    Re: 700i error 077-123

    Quote Originally Posted by MPrints View Post
    Still battling this problem . . . I am able to run 8.5x11 sheets fine, but 17" jams every time. Heavier stock might get a few sheets through before jamming, text weight will jam every time
    Send me mail stoadis@gmail.com.
    I will show you some bulletins

  4. #4
    Junior Member
    Join Date
    Feb 2021
    Location
    Spartanburg, SC
    Posts
    1
    Rep Power
    0

    Re: 700i error 077-123

    Sorry to dredge up an old thread.

    I am running into the same issues and am curious as to what the problem actually was and how to fix it.

  5. #5
    Junior Member
    700i error 077-123


    Join Date
    Sep 2012
    Posts
    9
    Rep Power
    0

    Re: 700i error 077-123

    Quote Originally Posted by steve_h View Post
    Sorry to dredge up an old thread.

    I am running into the same issues and am curious as to what the problem actually was and how to fix it.
    Hello Steve it has been a while but if I recall correctly I had a tech come and help me and he found that the clutch at the machine (inboard) side of that area was the problem, I think a cracked plastic gear.

  6. #6
    Trusted Tech 50+ Posts zagrex's Avatar
    Join Date
    Dec 2011
    Location
    Istanbul
    Posts
    57
    Rep Power
    19

    Re: 700i error 077-123

    Quote Originally Posted by MPrints View Post
    I am getting this code repeatedly, when it happens the paper is just shy of entering the fuser - right at the trailing edge of the rubber belt feeding it into the fuser section. It will feed 2 sheets OK then stop on the third sheet. Always stops the sheet in the exact same position.
    Printing on 11x17 sheets tried feeding from 3 different trays. Occurs on both single side and duplex printing. I tried blowing off the sensors at the front and back of that section.
    Is there something specific I can try in component control to narrow it down?

    hello your problem is not sensor registration motor.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here