stronghold
Technician
"My Telegram: @Stronghold97"
Last Activity: 1 week ago
Joined: 04-12-2023
Location: Rome
-
This must be filled in when setting up scan to email. Without filling in, the scan button will always be inactive. I encountered this at the very beginning... -
Have you done THIS procedure?
If you have updated CPU1, CPU2, and BootRom and nothing has changed, then install a microSD card to make sure that...Leave a comment:
-
Have you filled out the "Device Information" section via the web interface, in the "System" section?...Leave a comment:
-
You can attach a photo so that we can understand what you mean.
You can get to the god door closing sensors only by removing the front white panel...Leave a comment:
-
What smtp server do you use? Do you have your own mail server or a third-party one (for example, Google or Outlook, or Yahoo)...Leave a comment:
-
Have you updated the firmware of the SPI FLASH? CPU1, CPU2 and Boot ROM?
The update procedure is described in this post. LINK...Leave a comment:
-
I usually test MFUs in the following order:
Step 1. Take a working sensor from tray 1 and install it in tray 2.- If the issue moves to tray
Leave a comment:
-
Hi. You have a trouble with SPI FLASH on CPUBoard. Look THIS POSTLeave a comment:
No activity results to display
Leave a comment: