Hello ,
After unsuccesfull firmware change one of our Bizhub 420 stuck's on lit display only.Is there a way to reset the firmware to fac...
42 results in 0.0122 seconds.
-
Bizhub 420 firmware change failure
-
Bizhub 420 strange behavior (jam)
A couple of days ago got my hands on 2 bizhub 420 ~90k/ ~400k and both manifest strange jams. Only on duplex print. One folds the paper before drum and... -
Bizhub 420/500 image cut
Hello ,
We have a couple of bizhubs 420/500 that have image cuting problem while copying non standart originals(like books and larger documents... -
BizHub 420 Counter reset?
Need to know how to reset operation panel user warning to "Replace Fusing unit soon" I have looked in service mode and reset all counters for... -
Bizhub 420 not printing
I have a Bizhub 420 that I can ping and pull up the web interface. I set it up and send a print job over to it and the data light flashes, but there is... -
Bizhub 420 firmware
Hello to every one,
Please can anyone send me all firmware for bizhub 420. -
Will a DF-607 work on bizhub 200/250???
I have a bizhub 200 with a DF-605 bad board. Need to order it and i will receive it on Tuesday.
At the same time I got a bizhub 420 for parts..... -
BizHub 420 with code C-3902
Anyone seen this code? I'm heading there today and do not have my manual with me. Solutions/desciption of problem would be welcomed.
Thanks. -
Change OACB
I had a bizhub 500 with death OACB board, i tried to install an OACB of bizhub 420.
When i try to install image control firmware i receve an error... -
Bizhub 420 c-2403 c-6701
Hi all and thanks a lot for your reply.
Today my customer called us for a biz 420 showing up a c-2403.
I replaced PS23 (it was not correctly... -
bizhub 420 freezes when the scan button is pushed
the copier works great. when I push scan. it locks up the screen and you can not do anything until you turn the main power switch off. help?... -
Bizhub 420 jamming on duplexed copies
I have a BZ 420 that jams on double sided copies. The jam code is j-3000. Jams from tray 3 only out of tray 1 and 2 runs fine. it will run about 300... -
Bizhub 420
Have a Bizhub 420 that jams at the reg.roller with the rear edge of the paper scrunched up after the loop roller as if rego roller has not started and... -
Tray 1 says ???
Hi,
We have a Konica Bizhub 420. In the Paper selection tray 2 says A4 etc but Tray 1 now suddenly says ??? and the tray has locked itself... -
bizhub 420 noise. ouch
so first off. this is a full system bizhub 420 it is making a vibrating noise when copying.
hard to explain but thought I would ask before I tear...
