Hi:
Im not a technician in printer . Im just a programmer that have a problem with my lazer printer. I have spended reasonable amount of...
18 results in 0.0284 seconds.
-
The page stuck in the first roller
-
konica bh c353 registration problems
Hello, paper out of all trays are off ( this is one of the problems I'm having with this machine) top to bottom ( main scan) had to adjust all paper... -
Ricoh 2105 weird jam problem.
Hi guys, I have Ricoh 2105 that jams out of all trays, any size, not constantly. We have thrown brand new rollers in all trays and it did not help. It... -
HP Color Laserjet CM 1017 Wrong printing
Hi everyone!
I've got a bad machine. It prints to a wrong area on paper, and just prints the 3/4 of the image.
What could be wrong?
... -
Priport JP 5000 only first print jam
When making new master, ONLY first print is jamed at B position. After removing jamed sheet, prints at all speeds and quantity without any problem.... -
-
KM Bizhub Pro C500 Fusing Problem
I have KM Bizhub Pro C500 machine but I have problem with fusing. If the page has full colour it dosen't fuse it or mostly it gets jam at the fuser so... -
Black lines on MPC2800
These lines appears only when you do Duplex from ADF and from the scanner glas. But only on the rear side.
What can it be?
I have clean... -
Help with C500 SC45-20 Error (PS8 & 9)
Was wondering if anyone could help - I bought a used C500 a couple of years back which I was unfortunately ripped off on (thread here. After initial problems... -
misfeeding
What would cause misfeeding in a Ricoh 1075 from the tandem tray. Appears to be overfeeding before the registration roller. Happens whether multiple or... -
Ricoh Aficio 2051 Feed Problem
This machine is beating me up.
The PCU unit was changed due to worn gears on the front related to toner
augering. Unfortunately the paper... -
paper registration Gear 22Z/39Z
Dear allI have a defective gear in the paper registration unit in my aficio 1060Part No.:AB01 7607...Description :Gear 22Z/39Z -
Paper feed problem with aficio 700
Hello
I need help on ricoh aficio 700 copier, the problem is paper gets jam between the feed roller, separation roller and transport roller I... -
c5501 paper crease
Has anyone seen a fault with the c5501 creasing NCR paper in the middle?
Can anyone advise?
Cheers -
Help Konica8150 registration problem
I have an 8150 that is not putting an image in the same place on a page. When fed from the stack by-pass
For example, if a document is printed...
