Canon Ir-Adv C2230

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • JParker
    Technician II

    Site Contributor
    50+ Posts
    • Jul 2015
    • 51

    #1

    [CQ] Canon Ir-Adv C2230

    Hey all. I have a coworker with an ir-adv c2230 giving green lines on copies as well as internal prints. I don't have a photo (sorry). We've tried replacing the ITB as well as the laser unit. Has anyone else run across a green line?
  • teckat
    Field Supervisor

    Site Contributor
    10,000+ Posts
    • Jan 2010
    • 16083

    #2
    Re: Canon Ir-Adv C2230

    Originally posted by JParker
    Hey all. I have a coworker with an ir-adv c2230 giving green lines on copies as well as internal prints. I don't have a photo (sorry). We've tried replacing the ITB as well as the laser unit. Has anyone else run across a green line?
    ??????

    Line direction _?
    Paperfeed Or Crossfeed ;-)
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

    Comment

    • teckat
      Field Supervisor

      Site Contributor
      10,000+ Posts
      • Jan 2010
      • 16083

      #3
      Re: Canon Ir-Adv C2230

      Originally posted by JParker
      Hey all. I have a coworker with an ir-adv c2230 giving green lines on copies as well as internal prints. I don't have a photo (sorry). We've tried replacing the ITB as well as the laser unit. Has anyone else run across a green line?
      ??????

      Line direction _?
      Paperfeed Or Crossfeed ;-)

      Does it travel on paper _?
      Did u test with single color test prints_?

      Are lines in Non-Image areas _?
      **Knowledge is time consuming, exhausting and costly for a trained Tech.**

      Comment

      • zoraldinho
        teacher-guide-expert-guru

        Site Contributor
        5,000+ Posts
        • Mar 2008
        • 5007

        #4
        Re: Canon Ir-Adv C2230

        Replace green drum.

        You are very modest with data.Please post a picture.
        If it ain't broke, don't fix it
        A picture is worth a thousand words

        Comment

        • dan7777
          Senior Tech

          500+ Posts
          • Dec 2012
          • 680

          #5
          Re: Canon Ir-Adv C2230

          Originally posted by JParker
          Hey all. I have a coworker with an ir-adv c2230 giving green lines on copies as well as internal prints. I don't have a photo (sorry). We've tried replacing the ITB as well as the laser unit. Has anyone else run across a green line?
          Open the door during copy and look at the drums. Weird colors like green usually are a color missing. Run test page 10 and see if all the colors are there. I would think ITB also if it is not cleaning the belt.

          Comment

          • JPiek
            Trusted Tech

            250+ Posts
            • Oct 2014
            • 435

            #6
            Re: Canon Ir-Adv C2230

            Asuming feed direction :

            If you get a green line in a spot where you would expect another color, like in a picture, i'd suspect the magenta drum haveing a blank. IE Yellow and Cyan, but no Magenta on that area. Like Dan7777 says, do a PG10, or a PG5 in magenta...

            You replaced the laseunit, so i guess you also checked to see if somehing is blocking the laser for magenta on the spot where the line is ?
            Johan

            Comment

            • JParker
              Technician II

              Site Contributor
              50+ Posts
              • Jul 2015
              • 51

              #7
              Re: Canon Ir-Adv C2230

              Hey guys! Sorry for the gaps, I haven't posted much and don't know what information to put out. The line is in the direction of paper feed, 2/3 of the way down the page. It doesn't replace colors. It does not travel with the paper, and appears exactly the same on every page. The line comes in the same spot on B/W, Picture/text, or on a blank page. It shows up on internal prints as well as copies.

              I will ask my co-worker for a picture. He works 2 hours away, and asked for help with troubleshooting. I suggested an ITB and Laser unit, which he replaced and it did not help.

              Comment

              • JPiek
                Trusted Tech

                250+ Posts
                • Oct 2014
                • 435

                #8
                Re: Canon Ir-Adv C2230

                I'd do a PG5 on all of the separate colors and do a halfway print (open door during printing) to see when the line occurs (on drum, on ITB, after Fuser).

                Black line

                (color line)
                Check that black line does not appear on entire image.
                Scratch on Photosensitive Drum
                Dirt on Primary Charging Roller
                Johan

                Comment

                • teckat
                  Field Supervisor

                  Site Contributor
                  10,000+ Posts
                  • Jan 2010
                  • 16083

                  #9
                  Re: Canon Ir-Adv C2230

                  Originally posted by JParker
                  Hey guys! Sorry for the gaps, I haven't posted much and don't know what information to put out. The line is in the direction of paper feed, 2/3 of the way down the page. It doesn't replace colors. It does not travel with the paper, and appears exactly the same on every page. The line comes in the same spot on B/W, Picture/text, or on a blank page. It shows up on internal prints as well as copies.

                  I will ask my co-worker for a picture. He works 2 hours away, and asked for help with troubleshooting. I suggested an ITB and Laser unit, which he replaced and it did not help.
                  ____________
                  You place a BLANK white sheet of paper on copy-glass.
                  Press start\copy, if there shows a green line down page that goes from lead edge to trail edge , tech needs to look at optics, including laser (again).

                  Note: a line can be digital one (electrical /board issue) or mechanical one( ITB, DRUM,DEV,FUSER)
                  **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                  Comment

                  • JParker
                    Technician II

                    Site Contributor
                    50+ Posts
                    • Jul 2015
                    • 51

                    #10
                    Re: Canon Ir-Adv C2230

                    Thanks guys, I will be going over this afternoon to help and I will try your suggestions!

                    Also, I have never heard of a line from a board? I am still a baby tech though, only a year in.

                    Comment

                    • teckat
                      Field Supervisor

                      Site Contributor
                      10,000+ Posts
                      • Jan 2010
                      • 16083

                      #11
                      Re: Canon Ir-Adv C2230

                      Originally posted by JParker
                      Thanks guys, I will be going over this afternoon to help and I will try your suggestions!

                      Also, I have never heard of a line from a board? I am still a baby tech though, only a year in.
                      ===============

                      Digital Line from a Board==nothing new ( especially on faxes )
                      **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                      Comment

                      • JParker
                        Technician II

                        Site Contributor
                        50+ Posts
                        • Jul 2015
                        • 51

                        #12
                        Re: Canon Ir-Adv C2230

                        Hey guys! I went over this afternoon, and I swapped out the black drum and the line is gone. Thank you for all the ideas and help! Have a great weekend.

                        Comment

                        • teckat
                          Field Supervisor

                          Site Contributor
                          10,000+ Posts
                          • Jan 2010
                          • 16083

                          #13
                          Re: Canon Ir-Adv C2230

                          Originally posted by JParker
                          Hey guys! I went over this afternoon, and I swapped out the black drum and the line is gone. Thank you for all the ideas and help! Have a great weekend.
                          ????
                          How is it possible that a tech would not inspect the most obvious > a Drum:-\

                          U stop halfway during copying, pull Drum/ Drums, and look at its air face.

                          Saves time and money in parts.
                          Troubleshooting is a science learned in the field,
                          It's a process of elimination and noteing your steps.

                          Good luck.
                          **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                          Comment

                          • copier tech
                            Field Supervisor

                            5,000+ Posts
                            • Jan 2014
                            • 8132

                            #14
                            Re: Canon Ir-Adv C2230

                            Exactly, so the lines were actually black lines not green!
                            Let us eat, drink, and be merry, because tomorrow we may die!

                            For all your firmware & service manual needs please visit us at:

                            www.copierfirmware.co.uk - www.printerfirmware.co.uk

                            Comment

                            Working...