image faults - distance between faults

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • MunsterTech
    Trusted Tech

    Site Contributor
    250+ Posts
    • Sep 2014
    • 377

    #1

    [CQ] image faults - distance between faults

    hi,

    have a new tech just started with us, I used to have a sheet with image fault measurements on for re-occurring marks and the distance between them in mm for drums, transfer roller, charge rollers, itbs etc

    does anyone have the sheet so i can print it off for him? Checked previous posts but cant find it.

    regards,
  • giogi
    Engineer senior

    100+ Posts
    • Jan 2016
    • 182

    #2
    Re: image faults - distance between faults

    the service manual report
    rep .jpg
    "Knowledge is a source, but unfortunately ignorance is a sea."

    Comment

    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22929

      #3
      Re: image faults - distance between faults

      Originally posted by giogi
      the service manual report
      [ATTACH=CONFIG]56518[/ATTACH]
      This good information ... especially if we knew what model it referred to. =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

      Comment

      • giogi
        Engineer senior

        100+ Posts
        • Jan 2016
        • 182

        #4
        Re: image faults - distance between faults

        In every service manual there is this table
        "Knowledge is a source, but unfortunately ignorance is a sea."

        Comment

        • zoraldinho
          teacher-guide-expert-guru

          Site Contributor
          2,500+ Posts
          • Mar 2008
          • 4999

          #5
          Re: image faults - distance between faults

          Originally posted by blackcat4866
          This good information ... especially if we knew what model it referred to. =^..^=

          A demanding customer.
          If it ain't broke, don't fix it
          A picture is worth a thousand words

          Comment

          • nathicana
            Trusted Tech

            Site Contributor
            250+ Posts
            • Aug 2008
            • 327

            #6
            Re: image faults - distance between faults

            Originally posted by giogi
            In every service manual there is this table
            In what section of the service manual is this table?

            Comment

            • giogi
              Engineer senior

              100+ Posts
              • Jan 2016
              • 182

              #7
              Re: image faults - distance between faults

              on the DX models in service manual chapter 7 Troubleshooting Items
              "Knowledge is a source, but unfortunately ignorance is a sea."

              Comment

              Working...