Canon service support tool

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • teckat
    Field Supervisor

    Site Contributor
    10,000+ Posts
    • Jan 2010
    • 16084

    #256
    Good, u may get lucky and have a working printer

    if you want to set up printer for BLACK Copies only>>


    Set Black as the Default Color

    Answer :

    Press the Auto Color Select Button on control panel:

    1. Select Black

    2. Select the Additional Function Button

    3. Select The Copy Settings Button and go to the Second Screen

    4. Press the Standard Settings Button

    5. Select Store ( A message will come up asking you if you wish to store this setting.)

    6. Select "Yes" Store in Memory

    7. Press the Done Button

    8. Press the Done Button again in order to go out of the Additional Function Screen
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

    Comment

    • pirijaa
      Technician
      • Dec 2010
      • 14

      #257
      Originally posted by teckat
      Good, u may get lucky and have a working printer

      if you want to set up printer for BLACK Copies only>>


      Set Black as the Default Color

      Answer :

      Press the Auto Color Select Button on control panel:

      1. Select Black

      2. Select the Additional Function Button

      3. Select The Copy Settings Button and go to the Second Screen

      4. Press the Standard Settings Button

      5. Select Store ( A message will come up asking you if you wish to store this setting.)

      6. Select "Yes" Store in Memory

      7. Press the Done Button

      8. Press the Done Button again in order to go out of the Additional Function Screen
      Thanks so much I'll try as soon as possible
      Tomorrow I bring about HDD
      thanks for the instructions and wait for SST...

      Comment

      • teckat
        Field Supervisor

        Site Contributor
        10,000+ Posts
        • Jan 2010
        • 16084

        #258
        If u need a 40gb-HDD for this model that is not an OEM from Canon,
        u have to search the internet {google} for them . most will be used/refurbished.

        Try these links below>>>
        IBM IC35L040AVER07-0 -IC35L040AVER07-0 - Find great deals on IC35L040AVER07-0 at DealTime

        IBM IC35L040AVVA07-0
        -IC35L040AVVA07-0 - Find great deals on IC35L040AVVA07-0 at DealTime


        SAMSUNG SP0411N -
        Samsung SP0411N 40GB 7200rpm 2mb HDD ATA-133 Hard Drive - Reviews, Features, and Prices $18 - $32 at DealTime
        Hitachi-HDS722540VLAT20 -Hitachi Deskstar 40 GB ATA-100 Hard Drive - Reviews, Features, and Prices $17 - $53 at DealTime
        Seagate ST340014A -ST340014A Hard Drives - Save time and find great deals on Hard Drives at DealTime

        Hitachi HDS728040PLAT20 -http://www.dealtime.com/HDS728040PLA...oducts?CLT=SCH
        **Knowledge is time consuming, exhausting and costly for a trained Tech.**

        Comment

        • pirijaa
          Technician
          • Dec 2010
          • 14

          #259
          3200

          Originally posted by teckat
          Knowledge and the will to learn is the first step , I can send u some information on the 3200, it is best to read and understand the workings of this printer.

          You can start testing this 3200 HDD,
          Have printer powered off
          1.Hold down the 1 & 9 key, while still holding> down power up 3200
          2.wait until u see the screen go into the download mode
          3. u will see white blocks dropping on screen/ let go of the 1&9 key
          4. wait about 30min. & see if it will complete this Defrag of the Hard Drive,
          5. U may get lucky and have this fix your 602 issue.
          6. If machine goes back to a 602 error code, u will have to buy or get a HDD somewhere.

          hope this helps, check your mail later for the 3200 information
          Thanks
          This is finish and now I have black screen with massage DOWNLOAD MODE what now ?

          Comment

          • xcopytech
            Service Manager

            1,000+ Posts
            • Aug 2006
            • 1783

            #260
            power off and then power on machine.

            Comment

            • pirijaa
              Technician
              • Dec 2010
              • 14

              #261
              3200

              Originally posted by xcopytech
              power off and then power on machine.
              I do thet and masagge on screen is E602-0002

              Nadamo Vam se uskoro i hvala mnogo

              Comment

              • mrfixit51
                Lead Service Technician

                1,000+ Posts
                • Oct 2008
                • 1975

                #262
                Originally posted by pirijaa
                I do thet and masagge on screen is E602-0002
                Then you are at the point you need the replacement hard drive, service support tool, and system software for the copier. Replace the hard drive with the proper one, use service support tool to format the hard drive and then use service support tool to load the system software onto the hard drive...
                "Once a King, always a King, but once a Knight is enough!"

                Comment

                • pirijaa
                  Technician
                  • Dec 2010
                  • 14

                  #263
                  Originally posted by mrfixit51
                  Then you are at the point you need the replacement hard drive, service support tool, and system software for the copier. Replace the hard drive with the proper one, use service support tool to format the hard drive and then use service support tool to load the system software onto the hard drive...
                  OK thanks , I have manuals and I need SST and firmware for IR C3200, please send to me...

                  Comment

                  • rtsai18

                    #264
                    I have the same issue many others have here.
                    I performed an 1 & 9 HDD scan on an IRC3200 that had issue with saving addresses.
                    After the scan, the unit totally broke down with E602-0001.

                    Can someone be kind enough to send me/tell me where I can download SST and firmware image?

                    Thanks.

                    Comment

                    • teckat
                      Field Supervisor

                      Site Contributor
                      10,000+ Posts
                      • Jan 2010
                      • 16084

                      #265
                      E602-0001
                      is not always a death sentence>
                      remove & re-seat BOOT Rom
                      check/remove/clean ends/re-seat RAM
                      could be a faulty Power supply
                      check HDD ribbon cable & HDD power cable



                      Try and get in service mode when progress bar is halfway/
                      go into the ERROR log and view if u have any other Error codes listed. Take Note of them.

                      Sometimes if u see any E 700 codes in there- u may need to address those first,
                      if addressed- it jump start your printer.
                      **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                      Comment

                      • pirijaa
                        Technician
                        • Dec 2010
                        • 14

                        #266
                        Halo teckat
                        Thanks you try help peaple , any sugest for me next, whit my E602-0002 on IR C3200

                        Comment

                        • teckat
                          Field Supervisor

                          Site Contributor
                          10,000+ Posts
                          • Jan 2010
                          • 16084

                          #267
                          Originally posted by pirijaa
                          Halo teckat
                          Thanks you try help peaple , any sugest for me next, whit my E602-0002 on IR C3200
                          U first need to go online,
                          using the links i posted for a HDD- buy one then i can help
                          -

                          this link from below has Hitachi HDD used for 17.00 US
                          http://www.compuvest.com/Search.jsp?...u=601008568-12



                          IBM IC35L040AVER07-0 -IC35L040AVER07-0 - Find great deals on IC35L040AVER07-0 at DealTime
                          IBM IC35L040AVVA07-0
                          -IC35L040AVVA07-0 - Find great deals on IC35L040AVVA07-0 at DealTime


                          SAMSUNG SP0411N -
                          Samsung SP0411N 40GB 7200rpm 2mb HDD ATA-133 Hard Drive - Reviews, Features, and Prices $18 - $32 at DealTime
                          Hitachi-HDS722540VLAT20 -Hitachi Deskstar 40 GB ATA-100 Hard Drive - Reviews, Features, and Prices $17 - $53 at DealTime
                          Seagate ST340014A -ST340014A Hard Drives - Save time and find great deals on Hard Drives at DealTime

                          Hitachi HDS728040PLAT20 -http://www.dealtime.com/HDS728040PLA...oducts?CLT=SCH
                          **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                          Comment

                          • pirijaa
                            Technician
                            • Dec 2010
                            • 14

                            #268
                            Thanks teckat
                            I've already reviewed, and we have some of these HDD in hp compaq d530 sff. As this example Hitachi Deskstar 40 GB ATA-100 Hard Drive - Reviews, Features, and Prices $17 - $53 at DealTime
                            Please give me further instructions ... pirijaa@gmail.com
                            Thanks

                            Comment

                            • teckat
                              Field Supervisor

                              Site Contributor
                              10,000+ Posts
                              • Jan 2010
                              • 16084

                              #269
                              That HDD will have to be formated and wiped clean/of all it's HP information

                              U then need the SST / AND to load 3200 firmware in SST program.
                              then u put in the HDD in 3200/ then u need to use the 3200 firmware format file to format again.
                              then u will be able to load the 3200 firmware on it.

                              if all goes well-u may get lucky and have a copier
                              **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                              Comment

                              • pirijaa
                                Technician
                                • Dec 2010
                                • 14

                                #270
                                Originally posted by teckat
                                That HDD will have to be formated and wiped clean/of all it's HP information

                                U then need the SST / AND to load 3200 firmware in SST program.
                                then u put in the HDD in 3200/ then u need to use the 3200 firmware format file to format again.
                                then u will be able to load the 3200 firmware on it.

                                if all goes well-u may get lucky and have a copier
                                I understand everything, but I need firmware for IR C3200 and SST, can you please send to me
                                Thanks

                                Comment

                                Working...