[Misc] Canon IR105+ light printing on top of the page in two places!(check the image)

[tinnyjay]

Hello
My IR105+ before 3-4 days started to do like this on copying and printing.
It means its not problem of a dirty glass or scanner.
You can check the image :
Test..jpg
I dont know what problem it is!
Please help me!!!!

[D_L_P]

Looks like the wrong toner again. Sweep out the hopper and developer and then use OEM Canon genuine toner.

[teckat]

Hello
My IR105+ before 3-4 days started to do like this on copying and printing.
It means its not problem of a dirty glass or scanner.
You can check the image :
[ATTACH=CONFIG]5091[/ATTACH]
I dont know what problem it is!
Please help me!!!!

you or someone used the wrong TONER~~~~~~~~~~~~~~~~~~~~~~~~~~~vacuum out all / re-start /fresh >with correct products
Head duh..jpg

[tinnyjay]

Really i didnt used a non OEM toner,but i fixed it by myself.
Again was a developer problem.
I didnt screwed very well last time or something like this and now everything its ok,after i vacumed it all,but i also have another problem.
In the fuser,between transfer belt and corona,the are some metallic wires rounded and they are cutted.Nothing happen even they are broken,but i dont know if they cause any problem in the future.No paper is misfeed till now.
Thank you so much

[teckat]

Really i didnt used a non OEM toner,but i fixed it by myself.
Again was a developer problem.
I didnt screwed very well last time or something like this and now everything its ok,after i vacumed it all,but i also have another problem.
In the fuser,between transfer belt and corona,the are some metallic wires rounded and they are cutted.Nothing happen even they are broken,but i dont know if they cause any problem in the future.No paper is misfeed till now.
Thank you so much

Take a Picture of them/ and post It

[SCREWTAPE]

Hello
My IR105+ before 3-4 days started to do like this on copying and printing.
It means its not problem of a dirty glass or scanner.
You can check the image :
[ATTACH=CONFIG]5091[/ATTACH]
I dont know what problem it is!
Please help me!!!!

What kind of copy is this.

Test pg from service mode,

Print,

Glass.

[tinnyjay]

What kind of copy is this.

Test pg from service mode,

Print,

Glass.

It is a printed test.

[tinnyjay]

Take a Picture of them/ and post It

Broken wires..JPG

[teckat]

[ATTACH=CONFIG]5095[/ATTACH]

those are plastic guide wires over corona unit/ if loose cut them off/ & replace them
they are used to prevent transfer of lead edge on thin paper from being pulled in gap

[SCREWTAPE]

That transfer sep looks old I would replace it.