imagerunner 3570 Light Copies/prints on OP Side

[mrfuser]

For some odd reason the pages coming out are lighter on the OP side than on the NON op side when exiting. New drum, fuser, transfer roller, cleaned it out and checked DV unit.

Any ideas?

Kelly

[Gamut]

Did you clean mag roll in dev unit, had a few of those now, some cleaned, in others had to replace dev unit.

[teckat]

For some odd reason the pages coming out are lighter on the OP side than on the NON op side when exiting. New drum, fuser, transfer roller, cleaned it out and checked DV unit.

Any ideas?

Kelly

Check for toner on the slit glass located on the scanner laser assembly/
clean if needed
iR4570.jpg


Also check transfer roller is properly attached to the mounting bracket/
check for binding in plastic bracket

[WOETC]

Agree with previous posts, have also had deformed contact springs in the frame where they contact the transfer roller, gives same result.