C1060 Yellow issue.

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • DigiMan
    Trusted Tech

    Site Contributor
    250+ Posts
    • Jan 2013
    • 262
    #1

    [Misc] C1060 Yellow issue.

    Good evening everyone

    Little to say here since i've just met the guy but i got this the other day and im about to go there tommorow.
    RASTER_YELLOW.jpg

    What do you gyus think?
    PS:Not entirely sure if hes using OEM toner or not.
    I don't like the new copier I just bought. It says "put face down" but every time I do it, it blinds my eyes.
    Tags: None
    • Synthohol
      Certified Konica Expert

      Site Contributor
      5,000+ Posts
      • Mar 2016
      • 5798
      #2
      Re: C1060 Yellow issue.

      swap the dv units with another color and see. looks like a DV issue to me.
      We know a thing or two because we've seen a thing or two.
      The medication helps though...

        Comment

        • MADSYS
          Technician
          • Sep 2009
          • 10
          #3
          Re: C1060 Yellow issue.

          Most of the times this failure is related to developer outage ( partially gone to the waste box ).
          The cause still not clear but you can find this somehow explained on Troubleshooting Guide V2.0
          A new F/W was recently released. Look for C1070all_gmw20.zip file on MKM website.
          Good luck !

            Comment

            • DigiMan
              Trusted Tech

              Site Contributor
              250+ Posts
              • Jan 2013
              • 262
              #4
              Re: C1060 Yellow issue.

              Goodmorning everyone

              When i got there yesterday the machine wasn't even working,it was popping C-2811.
              By pulling out the drum i noticed the mag roller on the yellow dv was completely drained.
              Tried to inspect the waste box but the client had alrdy cleared it out.
              Didnt find anything unsual inside other than the yellow/magenta drum and all the coronas are
              at 100%.
              Thinking about just changing the yellow dv for starters to get it working,but i still dont know the
              reason why the dv dissapeared.
              I don't like the new copier I just bought. It says "put face down" but every time I do it, it blinds my eyes.

                Comment

                • wjurls
                  Trusted Tech

                  Site Contributor
                  250+ Posts
                  • Feb 2017
                  • 494
                  #5
                  Re: C1060 Yellow issue.

                  Did you ever resolve this issue? I have a C1060L with the exact same issue. All 4 developing units and fresh developer were changed out 33K ago for regular maintenance. Now the yellow developer is low to the point of not covering the sleeve. Subsequent C-4631 and C-2811 codes. Other colors seem fine. Everything OEM.

                  Thanks

                  Lee

                    Comment

                    • blackcat4866
                      Master Of The Obvious

                      Site Contributor
                      10,000+ Posts
                      • Jul 2007
                      • 22997
                      #6
                      Re: C1060 Yellow issue.

                      Charge loss will make it suck developer. Start with your primary charge units and possibly drums. How many copies on these consumables?
                      If you'd like a serious answer to your request:
                      1) demonstrate that you've read the manual
                      2) demonstrate that you made some attempt to fix it.
                      3) if you're going to ask about jams include the jam code.
                      4) if you're going to ask about an error code include the error code.
                      5) You are the person onsite. Only you can make observations.

                      blackcat: Master Of The Obvious =^..^=

                        Comment

                        • wjurls
                          Trusted Tech

                          Site Contributor
                          250+ Posts
                          • Feb 2017
                          • 494
                          #7
                          Re: C1060 Yellow issue.

                          Drums were all replaced about 60K ago, 33K ago all developing units, developer, charge coronas, and transfer belt, rollers etc (PM Kit) were replaced. Calibrations performed and Fiery Calibration completed. Machine only has 1 million total count.

                          I will have to load fresh developer and double check all settings next visit. Firmware was pretty old. Flashed to latest level. Problem is only seen with the yellow DV.

                          Curious what the OP finally did to resolve this issue.

                          Lee

                            Comment

                            Previous template Next
                            Working...