ibizhub 920 pro

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • samirelg01
    • Jul 2025

    #1

    [CQ] ibizhub 920 pro

    i early bay ibizhub 920 pro and i contacted one problem and i didn't resourd it.he give me a copy very unclear on A4 and little clear on A3.i try with all piece :cylindre,coron,developor , tonner ;in system but i don't arrived to a solution ...... please if there a possibility please help me.....i waiting for the answer
  • allan
    RTFM!!

    5,000+ Posts
    • Apr 2010
    • 5462

    #2
    Re: ibizhub 920 pro

    Stop the machine in the middle of a copy. Is the image on the cylindre clear or not?
    Transfer could be one problem.
    Whatever

    Comment

    • samirelg01

      #3
      Re: ibizhub 920 pro

      i do it .the copy is not clear

      Comment

      • allan
        RTFM!!

        5,000+ Posts
        • Apr 2010
        • 5462

        #4
        Re: ibizhub 920 pro

        Make sure that the drum is earthed. Make sure the Development unit bias makes contact.
        Whatever

        Comment

        • Mick01
          Trusted Tech

          250+ Posts
          • Nov 2012
          • 362

          #5
          Re: ibizhub 920 pro

          Hi,
          Are you referring to copying off the glass or printing via PC?
          If copying I would start by cleaning your optics. When the mirrors get dusty it lightens the image. It performs a white refernce check when it is powered on to adjust this.
          If printing is the issue and you have confirmed the image is light on the drum then the suggestions from the previous post need to be checked.

          Comment

          • samirelg01

            #6
            Re: ibizhub 920 pro

            i'm printing via pc it's the same copy.and i changed the drum the developement but i don't get the clear copy ..... i think the problem is coming in system or cards electrinics ..

            Comment

            • Synthohol
              Certified Konica Expert

              Site Contributor
              5,000+ Posts
              • Mar 2016
              • 5839

              #7
              Re: ibizhub 920 pro

              sounds just out of focus, have you cleaned the dust proof glass above the drum in the main body?
              also maybe the printhead bumped out of position in its travel to you.you may want to take off the side panels and reseat the printhead
              We know a thing or two because we've seen a thing or two.
              The medication helps though...

              Comment

              • blackcat4866
                Master Of The Obvious

                Site Contributor
                10,000+ Posts
                • Jul 2007
                • 23008

                #8
                Re: ibizhub 920 pro

                A sample of your problem would be very helpful. =^..^=
                If you'd like a serious answer to your request:
                1) demonstrate that you've read the manual
                2) demonstrate that you made some attempt to fix it.
                3) if you're going to ask about jams include the jam code.
                4) if you're going to ask about an error code include the error code.
                5) You are the person onsite. Only you can make observations.

                blackcat: Master Of The Obvious =^..^=

                Comment

                • samirelg01

                  #9
                  Re: ibizhub 920 pro

                  i clean the glass but not thing for this time
                  i want to change the cards but which of them control the copy
                  or some problem in the system copy

                  Comment

                  Working...