We have a bizhub C451 fuser that we are trying to locate the reset pico fuse on the fuser/fixing unit. I swear it was on the end, however we seem to have all of the covers off and cannot locate it. Does anyone have some specific information for location or a picture by chance? Thanks in advance, I.T. guy back in Copier division
-
It does not matter how slowly you go as long as you do not stop. โConfucius -
Re: C451 Pico Fuse Location
Side cover in a black rubber tube likely with zip ties is the green .063A fuse.We know a thing or two because we've seen a thing or two.
The medication helps though... -
Re: C451 Pico Fuse Location
If you install the life stop fw you dont need to worry about replacing the fuse on the transfer & fuser units.Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
โComment
-
Re: C451 Pico Fuse Location
Under the cover the same side as the plug/connector its zipped tied,it is under a clear tube.Comment
Comment