Fiery showing FF on c6500 ic408

[mariuscmr]

Re: Fiery showing FF on c6500 ic408

I'm also interested in the software image after a HDD crash. I managed to clone the OS and Backup partition, but the one labeled "Fiery" has got a lot of bad sectors and unreadable files. It's for Fiery X3eTY2-10. Can I get it, please, if I also contribute?

Thank you!

[Synthohol]

Re: Fiery showing FF on c6500 ic408

I have for the ic408 versions 1.1 and 2.0
Do not try 2.0 unless you have had the bios and ram upgrade already installed.
Just 1 contributor badge away from getting that fiery up and running

Still applies.

[Walterj]

Re: Fiery showing FF on c6500 ic408

Looks like I need a hard drive or Reload the software and my tech is 3 days out.

I am looking to operate the printer without the controller , direct from server or PC.

Is that possible? I am being told yes and No.

I have gone into the dip switches DIPSW 2-1 (1) On

Set my NIC Ip to a range that is will pick up.

Connected to the appropriate LAN on the machine.

Is it futile? Can you only print via a controller?

good day
The error presented by your fiery must be due to the defective HDD, I recommend you replace it and load the operating system.
You can write to me at walvaradocruz@gmail.com
Greetings.

[Synthohol]

Re: Fiery showing FF on c6500 ic408

you are responding to a user's post from 3 years ago.
please check the date of posting if you are quoting someone.