Trouble shooting - fs532 j-7229

[FixitYo]

Re: Trouble shooting - fs532 j-7229

☆ Trouble shooting ☆
※ Symptom - Intermittent finisher JAM (J-7229) occurred
※ Model with FS-532 Finisher
KM bizhub PRO 951 PRESS 1052,1250
※ Cause - Finisher exit sensor JAM occurs when the paper badge can not be detected due to contamination of the light receiving part.
※ How to handle - After cleaning the part appearing like a black non-woven fabric under the exit sensor of the finisher (responsible for the exit sensor sensor), solve the symptoms.
☆ ☆ If you continue to clean the light-receiving part, J-7229 symptoms will not be treated even if you clean it later.
Applying the light-receiving part with black oil magic will make it completely processed.
Or replace the non-woven material parts of the light receiving part.

Thank You .... this tip got me right to the problem, spot on!!

[wjurls]

Re: Trouble shooting - fs532 j-7229

I have same jam J 7229 today, on km 950 with FS-532 finisher. I see that paper hit the black plastic on exit. To solve problem on quickly i cut that plastic. I will put new plastic but it works without[ATTACH=CONFIG]50139[/ATTACH]

No need to replace the plastic. They will work fine with the end trimmed off. Konica upgraded this exit guide in later later revisions.

[screw]

Re: Trouble shooting - fs532 j-7229

I have same jam J 7229 today, on km 950 with FS-532 finisher. I see that paper hit the black plastic on exit. To solve problem on quickly i cut that plastic. I will put new plastic but it works withoutScreenshot_20210914_190118.jpg

[ysshin79]

Re: Trouble shooting - fs532 j-7229

ysshin79 has found a solution and is sharing. Thank you sir.

I can't read his handwriting on the samples though. =^..^=

Thank You Sir.
I am Korea Republican.

Sample handwriting is Hangul.

The handwriting is in Korean language, and painting the sensor sensor with a black oil pen means that the symptoms will be solved.

It is a translation of Korean language into English into Google Translator. Thank you.

[blackcat4866]

Re: Trouble shooting - fs532 j-7229

ysshin79 has found a solution and is sharing. Thank you sir.

I can't read his handwriting on the samples though. =^..^=

[Phil B.]

Re: Trouble shooting - fs532 j-7229

☆ Trouble shooting ☆
※ Symptom - Intermittent finisher JAM (J-7229) occurred
※ Model with FS-532 Finisher
KM bizhub PRO 951 PRESS 1052,1250
※ Cause - Finisher exit sensor JAM occurs when the paper badge can not be detected due to contamination of the light receiving part.
※ How to handle - After cleaning the part appearing like a black non-woven fabric under the exit sensor of the finisher (responsible for the exit sensor sensor), solve the symptoms.
☆ ☆ If you continue to clean the light-receiving part, J-7229 symptoms will not be treated even if you clean it later.
Applying the light-receiving part with black oil magic will make it completely processed.
Or replace the non-woven material parts of the light receiving part.

ok do you have a point to make or a question to ask about a problem?

[ysshin79]

Re: Trouble shooting - fs532 j-7229

BandPhoto_2018_07_13_20_17_42.jpgBandPhoto_2018_07_13_20_17_47.jpg
BandPhoto_2018_07_13_20_17_49.jpg

[ysshin79]

☆ Trouble shooting ☆
※ Symptom - Intermittent finisher JAM (J-7229) occurred
※ Model with FS-532 Finisher
KM bizhub PRO 951 PRESS 1052,1250
※ Cause - Finisher exit sensor JAM occurs when the paper badge can not be detected due to contamination of the light receiving part.
※ How to handle - After cleaning the part appearing like a black non-woven fabric under the exit sensor of the finisher (responsible for the exit sensor sensor), solve the symptoms.
☆ ☆ If you continue to clean the light-receiving part, J-7229 symptoms will not be treated even if you clean it later.
Applying the light-receiving part with black oil magic will make it completely processed.
Or replace the non-woven material parts of the light receiving part.