KM Feed rollers

[Synthohol]

first a question, who operates a copier at 5F?
secondly im talking room temp out of the bag you can tell the real a00js from the chineseium trashy ones.

[KMFLT3CH]

Looks like KM is phasing out a couple of part numbers for rollers:

A00J563600 is updated to ADXG560100
A64J564101 is updated to ADXG560200

[tsbservice]

Looks like KM is phasing out a couple of part numbers for rollers:

A00J563600 is updated to ADXG560100
A64J564101 is updated to ADXG560200

I noticed that too and wandering if they are fully transitioning to Alibaba
However I used to see rubber rollers on Toshiba flattened at 80k and without any tyre grip like race car slick tyres. Not bad at all on KM side.

[4Toon]

Looks like KM is phasing out a couple of part numbers for rollers:

A00J563600 is updated to ADXG560100
A64J564101 is updated to ADXG560200

Does a new part number mean a new tire? If so, will they last longer than 80k?

lol

[4Toon]

On PC-416, I run the black pickup tires on all 3 tires. They do about 600k pages. Tire rotation is needed on the feed and sep when you are there, replacing a drum or cleaning.

Running all-black pickup tires on an 808 feed system does not seem to work.

[FredJ]

first a question, who operates a copier at 5F?
secondly im talking room temp out of the bag you can tell the real a00js from the chineseium trashy ones.

yup, out of the bag at 5f, I dont keep my parts and tool bag inside, it stays in the service vehicle weather its 98f or -20f outside. my point being they do change color and you cant go by that, at least in this area.

[Synthohol]

well in north NJ USA the rollers stayed the same color in the bag in my car.
or at least they did, im retired now and will concede this debate due to the fact ill likely never install another feed roller in my life and im sorry you have to work in such a cold area, i wont leave the house under 30f. ill break.