Konica compatable RFIDeas card readers

[radd]

Re: Konica compatable RFIDeas card readers

well i gave you a positive rep point.
dunno if it will reverse your red one but i had to try.

Much appreciated


I also deleted my post in that thread, not sure that helps either.

I always like to learn things the hard way

[Synthohol]

Re: Konica compatable RFIDeas card readers

but learning the hard way sticks with you better IMO.

[radd]

Re: Konica compatable RFIDeas card readers

Yes, can't help you with the LDDs but...

You should download the PC prox tool for windows. The AKU has some pretty cool tools including the ability to read up to 4 card types, and to detect and configure the card you want to use. I have no idea what format is being sent to and read by the machine, but the AKU allows for some pretty advanced configuration to make a match. We have been able to use AK0 and AKU models in the same account and they read the card the same (after the configration changes). You just can't mix AU 205H/AK*.. have fun..E

I can see why you said have fun now


Currently I have loaded Ldd G26-01 using Service mode / System2 / Driver install

Then restart

Service mode / Stop > 9 / authDevice2 / card / end

turn off

connect usb reader: RDR-80581-AKU (RFIDeas)

restart


Then I get: 2 errors

Turn on the authentication device

Please Load Ldd


I'm trying it on a C368 with firmware:

ManVersion - 12
A7PU0Y0-3000-G00-W1


Not sure exactly where my issue lies

[Synthohol]

Re: Konica compatable RFIDeas card readers

the LDD you installed is if you need both a keyboard AND the card reader.
is this the case?
if not use the other one i gave you.

btw, G00-X4 is the correct latest base FW, i suggest you try it as well.
there is no W1 FW.

[radd]

Re: Konica compatable RFIDeas card readers

Yes, sorry G00 - W4

I have tried both just in case, but the results are the same.

I will try the upgrade to G00-X4 as I understand that is better for Papercut?


Thanks again for all your help

[Synthohol]

Re: Konica compatable RFIDeas card readers

just to ask, where are you plugging in the card reader? which USB port?

[radd]

Re: Konica compatable RFIDeas card readers

just to ask, where are you plugging in the card reader? which USB port?

I have tried with each one including the front by the touch panel!

[tsbservice]

Re: Konica compatable RFIDeas card readers

You need to connect card reader FIRST(use the rightmost usb port just to be sure) then LDD then stop 9 and under Management Function Choice - Authentication Device 2 - Card.

[radd]

Re: Konica compatable RFIDeas card readers

You need to connect card reader FIRST(use the rightmost usb port just to be sure) then LDD then stop 9 and under Management Function Choice - Authentication Device 2 - Card.

Thanks, tried that still getting the same thing.

[Synthohol]

Re: Konica compatable RFIDeas card readers

do you know for a fact the reader works?
if its used was it on another MFG? maybe try pcprox and see if it even shows up in the window.

[tsbservice]

Re: Konica compatable RFIDeas card readers

Radd, can you post screenshots?

[radd]

Re: Konica compatable RFIDeas card readers

do you know for a fact the reader works?
if its used was it on another MFG? maybe try pcprox and see if it even shows up in the window.

Brand new reader, works fine in pcprox and reads my tags no problem.

[radd]

Re: Konica compatable RFIDeas card readers

Radd, can you post screenshots?

Can't at the moment, just left the office, have customer install tomorrow morning, but I'll try later in the day

Thank you and Synthohol for all your help

[tsbservice]

Re: Konica compatable RFIDeas card readers

Can't at the moment, just left the office, have customer install tomorrow morning, but I'll try later in the day

Thank you and Synthohol for all your help

Yeah, just Synth is the man. Always be and always will.

[radd]

Re: Konica compatable RFIDeas card readers

Yeah, just Synth is the man. Always be and always will.

Well, your both top of my list