BizHub Config page? "Generic 25C-0i"

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • copyman
    Owner / Technician

    Site Contributor
    2,500+ Posts
    • Sep 2005
    • 4133

    BizHub Config page? "Generic 25C-0i"

    Just got in an off lease C250i and config page has "Generic 25C-0i" at top. Config page shows "printer storage Installed". Updated firmware and no change. There were screws missing from back cover so not sure if something was removed?
    Thanks in advance
  • femaster
    Service Manager

    1,000+ Posts
    • May 2011
    • 1378

    #2
    Is Software Switch 10 set to hex 02? Generic is usually when it's set to 00, and Konica should be 02.
    A Ricoh Service Tech for 7 year. A Konica Minolta Service Tech for 7 years. Now, KM service manager for 4 years.
    My Ricoh knowledge is slowly dwindling away at this point. Many things have been lost to time...

    Comment

    • mitchl
      Senior Tech

      Site Contributor
      500+ Posts
      • Apr 2007
      • 500

      #3
      Originally posted by femaster
      Is Software Switch 10 set to hex 02? Generic is usually when it's set to 00, and Konica should be 02.
      That should get the machine its identity back.

      Comment

      • Synthohol
        Certified Konica Expert

        Site Contributor
        5,000+ Posts
        • Mar 2016
        • 5385

        #4
        i second that as well as checking the machine/type to make sure there arent FF codes in there which happen after a brainwash.
        We know a thing or two because we've seen a thing or two.
        The medication helps though...

        Comment

        • tsbservice
          Field tech

          Site Contributor
          5,000+ Posts
          • May 2007
          • 7565

          #5
          Originally posted by copyman
          Just got in an off lease C250i and config page has "Generic 25C-0i" at top. Config page shows "printer storage Installed". Updated firmware and no change. There were screws missing from back cover so not sure if something was removed?
          Thanks in advance
          I always print MML then scan to archive it.
          Then you can upload it somewhere and I'm more than happy to help with deciphering
          A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
          Blessed are they who can laugh at themselves, for they shall never cease to be amused.

          Comment

          • 4Toon
            Technician

            50+ Posts
            • Mar 2023
            • 90

            #6
            Not sure if this is what you are talking about but in the webdev you can change the device name and then that shows up on the top of pages like counters and other reports

            Comment

            • tsbservice
              Field tech

              Site Contributor
              5,000+ Posts
              • May 2007
              • 7565

              #7
              copyman another thought.
              Being KM C250i machine switch 10 should be never touched/changed under normal circumstances. If you suspect anything just remove back cover and inspect if storage board(NVME branded Phison, Toshiba or Kioxia) is there(not CF card!).
              A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
              Blessed are they who can laugh at themselves, for they shall never cease to be amused.

              Comment

              • KMFLT3CH
                Trusted Tech

                100+ Posts
                • May 2017
                • 177

                #8
                This issue goes back 20 years and from my experience the solution is always the same: Switch 10, Hex 02, Fix

                Used to see this a lot on the old biz500, C300s, all those old models. Haven't seen it in a while myself.

                During boot up Instead of the hourglass screen you'll get "planets" - in fact if you search planets on the knowledgebase you'll get an article about it.

                Comment

                • Scope
                  Technician
                  • Feb 2022
                  • 15

                  #9
                  probably a Develop brand that's all

                  As a brand of Konica Minolta Business Solutions Europe GmbH, DEVELOP

                  Had the same issue with config page
                  Last edited by Scope; 10-02-2024, 06:41 AM.

                  Comment

                  • copyman
                    Owner / Technician

                    Site Contributor
                    2,500+ Posts
                    • Sep 2005
                    • 4133

                    #10
                    Thanks for the replies.Put C250i with normal kon/min config page next to one with generic config page to compare, machine type are same. Tried switch 10, 02 and message came up for NFC or something. Had both rear covers off and both the same. Nothing missing.
                    It's not a big deal because machine seems to be working fine and has low meter of 25k. Just thought it would be something simple.

                    Comment

                    Working...