Afraid I asked this question here before, but.......

[Hansoon]

If so, cannot find the answer with the search mode and my apologies if bugging you.
So, her once again:

Which one is the Latest & Greatest for the BH-C-284e:

A5C10Y0-F000-G20-M1
A5C10Y0-F000-GDR-M1 (00)
A5C10Y0-F000-GDS-M1(00)
A5C10Y0-F000-GDT-M1(00)
A5C10Y0-F000-GDU-M1(00)

If going alphabetical, it should be A5C10Y0-F000-GDU-M1(00)
Correct? Or is there even newer/better?

Hans

[Synthohol]

always alphabetical progression except weird special FW, id only use special if the machine exhibited the specific symptom it was designed to fix.
you are correct sir in your hypothesis

[copyman]

Attached DSCF2775[1].jpg is C284e F/W list on Kon/Min dealer website

[copyman]

Here is C284e F/W list on Kon/Min dealer website

[Hansoon]

Thanks guys,
so
A5C10Y0-F000-GDU-M1(00)
appears to be the latest, and date 4/7/2022 seems good for such an old machine 😀

Hans

[Synthohol]

i think you still have to set the bit switch (219 hex 0?) for SMB 2 scanning if needed.
someone double check my hex, im so out of practice. and ntlm 1.2 in admin.

[Duplicator]

i think you still have to set the bit switch (219 hex 0?) for SMB 2 scanning if needed. someone double check my hex, im so out of practice. and ntlm 1.2 in admin.

On our machines simply installing GDU-M1 allowed SMB2 to work as long as the client settings were set correctly in Admin mode. If I recall correctly the dip switch was used to force a version of SMB.