KM C258 / C308 - C163 Code

[aberock]

Hi there ,

can someone guide me in how to replace the mfp board in c258 ?
i know the step in 4 series but for 8 series prcb is with mfp together .
there is no option for engine backup.

I try to swap the mfp board - C163 code appear .
then i make a replacement for the ssd still same .
i plug in a789 file to flush it code still remain .
already load firmware with correct machine type still same . C163 / C164

Please guide me , i already make 2 machine get the same code

[copyman]

Did you swap eeprom 1 & 2 from old board to donor MFP?

[aberock]

Did you swap eeprom 1 & 2 from old board to donor MFP?

Yes already swap .

[doinbox]

What are your machine type settings?

[aberock]

What are your machine type settings?

C258 61
C308 62

[doinbox]

C258 61
C308 62

No problem was just double checking. What firmware version are you loading?

[Synthohol]

did you let it reboot by itself 3 times? then you should get a 390 code IIRC then hit restore data.
ive never gotten a used board to work in another machine ever, always a new or reman board.
i think there is a way to flush the board itself as we used to get reflashed rebuilt boards from hytec.
hope im wrong.

[aberock]

did you let it reboot by itself 3 times? then you should get a 390 code IIRC then hit restore data.
ive never gotten a used board to work in another machine ever, always a new or reman board.
i think there is a way to flush the board itself as we used to get reflashed rebuilt boards from hytec.
hope im wrong.

no sir after the reset file the machine still boot up to the code C163