KonicaMinolta Bizhub C252 warm up time

[Zesti]

Hi there,
A newly installed Bizhub C252 have this problem. After going going in to sleep mode, it takes considerable amount of time (1-2 mins) to come online(Ready to Copy).
Any help

[copytechman]

Deep sleep? 1-2 min's isn't excess considering warm-up and stabilization processes on those boxes..

Regards!
A.

[mabawser]

In agreement with copytechman. That isnt a long time. If it causing problems adjust when it goes into sleep mode so it isnt going into sleep mode too soon. max -240 minutes

[Zesti]

Thanks buddies.
Is there any way to disable sleep mode...

[copytechman]

Service mode -> system 1 -> no sleep

Functions • To display the option of “OFF” for the Sleep Mode Setting screen available from
Administrator Setting.
Use • To display the option of “OFF” for the Sleep Mode Setting.
NOTE
• The sleep mode will begin in 48 hours even if it sets it to “OFF.”
Setting/
Procedure
• The default setting is “Prohibit.”
Permit “Prohibit”

[KEVIN900]

Also in Admin Mode -> System Settings-> Power Save-> then set to up to 4 Hours (240 minutes). Factory default is 15 or 20 minutes. set a bit longer, like 2 hours is more reasonable. I don't know if I'd want my machine to never turn off. Depends if the customer is a 24/7 operation, or a 9-5, Monday-Friday operation.

[Zesti]

Thanks Copytechman,
Will try that.
The customer is a 24/7 operation and already set the sleep to 240 min. but they want immediate response from the machine, especially first time in the morning....