How to select a sleep mode at Kyocera's printers?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • martinkrys
    Technician
    • Feb 2011
    • 29
    #1

    How to select a sleep mode at Kyocera's printers?

    Hi everybody,

    I'm encountering an issue with my P6235cdn printer. Despite being almost new, it's been experiencing a serious problem with its sleep mode. The printer tends to hang up in this mode, and the only way to resolve the issue is by unplugging the power cord for at least 15 minutes.

    In multifunction printer (MFP) models, we can change maintenance mode 346 to address similar issues. However, I'm unsure how to achieve the same result on this standalone printer. Is there a sub-page under the Command Center where I can change this setting? Any guidance or advice would be greatly appreciated.
    Last edited by martinkrys; 05-14-2024, 11:16 AM.
    Tags: None
    • ihatefinishers13
      Senior MFP Technician

      500+ Posts
      • Feb 2020
      • 703
      #2
      On the webpage, after logging in, select Device Settings > Energy Saver/Timer > Quick Recovery. Never had an issue like what you're experiencing, and we have had 30 of these in the field for the past 5 years.

        Comment

        • copier tech
          Field Supervisor

          5,000+ Posts
          • Jan 2014
          • 8156
          #3
          Originally posted by martinkrys
          Hi everybody,

          I'm encountering an issue with my P6235cdn printer. Despite being almost new, it's been experiencing a serious problem with its sleep mode. The printer tends to hang up in this mode, and the only way to resolve the issue is by unplugging the power cord for at least 15 minutes.

          In multifunction printer (MFP) models, we can change maintenance mode 346 to address similar issues. However, I'm unsure how to achieve the same result on this standalone printer. Is there a sub-page under the Command Center where I can change this setting? Any guidance or advice would be greatly appreciated.
          There were a few issues on this model. Updating the firmware & sleep settings does the trick.
          Let us eat, drink, and be merry, because tomorrow we may die!

          For all your firmware & service manual needs please visit us at:

          www.copierfirmware.co.uk - www.printerfirmware.co.uk
          ​

            Comment

            • BBM
              Senior Tech

              500+ Posts
              • Dec 2020
              • 896
              #4
              Turn off sleep mode in network settings

                Comment

                • Samanator
                  Service Manager

                  Site Contributor
                  VIP Subscriber
                  500+ Posts
                  • Sep 2017
                  • 579
                  #5
                  ....and update the firmware.

                    Comment

                    • KYO_OEM
                      Senior Tech

                      500+ Posts
                      • Aug 2011
                      • 718
                      #6
                      try to send FRPO command [!R! KCFG "BAMM",0; EXIT;]. to be able for [quick recovery].
                      otherwise it`s not available, i think.
                      Reset by [!R! KCFG "BAMM",1; EXIT;]
                        👍 3

                        Comment

                        • martinkrys
                          Technician
                          • Feb 2011
                          • 29
                          #7
                          Quick recovery mode is not available in Europe, firmware is allready newest, i'll try with FRPO command. Thanks for help :-). !R! KCFG "BAMM",0; EXIT; works fine, now "Quick recovery" mode is available under "Sleep mode" settings
                          Last edited by martinkrys; 05-17-2024, 01:26 PM.

                            Comment

                            Previous template Next
                            Working...