4103/4104 jam CS5052

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • PrintWhisperer
    replied
    Re: 4103/4104 jam CS5052

    Check for intermittent varying registration and go after the clutch Avio mentioned.

    Leave a comment:


  • blackcat4866
    replied
    Re: 4103/4104 jam CS5052

    Originally posted by tsbservice
    Sounds crazy stupid to me 😀
    You omit the middle part and end up with just belt sensor.
    LOL! =^..^=

    Leave a comment:


  • tsbservice
    replied
    Re: 4103/4104 jam CS5052

    Originally posted by blackcat4866
    You might take a look at the sensor just past the second transfer roller. Which name do you like?:

    belt winding sensor
    belt wound sensor
    belt roll-up sensor

    PARTS SENSOR OPT. SP 303NW94060

    Yes, they are all the same single sensor. Kyocera just cannot seem to make up it's mind what to call it.

    No, actually, I understand that different teams of writers prepare different parts of the manual, and they don't always translate the same word, the same way.

    You can check the sensor operation in U031 [BELT SENSOR]. =^..^=
    Sounds crazy stupid to me 😀
    You omit the middle part and end up with just belt sensor.

    Leave a comment:


  • blackcat4866
    replied
    Re: 4103/4104 jam CS5052

    You might take a look at the sensor just past the second transfer roller. Which name do you like?:

    belt winding sensor
    belt wound sensor
    belt roll-up sensor
    PARTS SENSOR OPT. SP 303NW94060

    Yes, they are all the same single sensor. Kyocera just cannot seem to make up it's mind what to call it.

    No, actually, I understand that different teams of writers prepare different parts of the manual, and they don't always translate the same word, the same way.

    You can check the sensor operation in U031 [BELT SENSOR]. =^..^=

    Leave a comment:


  • avio2
    replied
    Re: 4103/4104 jam CS5052

    even if it's not that precise code

    J1403/J1404 Conveying sensor non-arrival
    jam
    Object: Paper feeder or Large capacity feeder
    Condition: There is a damage on paper. (Paper is
    caught. Conveying capability is decreasing. Or,
    paper is slipping.)
    J1403/J1404 Conveying sensor non-arrival
    jam
    Object: Paper feeder or Large capacity feeder
    Condition: There is no damage on paper. (Feed
    drive does not start. Or, conveying clutch does
    not operate correctly.)


    i think

    Leave a comment:


  • McCrazy
    started a topic 4103/4104 jam CS5052

    4103/4104 jam CS5052

Working...