5053ci Adj lead edge void

[buzz]

When printing photos, paper jamming at the fuser.
Everything else prints fine. It seems the lead edge gets stuck unto the fuser and causes an accordion jam.

Anyone know the lead edge void adjustment on these?

Or any other suggestions?

Thanks

[buzz]

Re: 5053ci Adj lead edge void

When printing photos, paper jamming at the fuser.
Everything else prints fine. It seems the lead edge gets stuck unto the fuser and causes an accordion jam.

Anyone know the lead edge void adjustment on these?

Or any other suggestions?

Thanks

sorry found it, U402, i was looking in the wrong area of the manual.

too bad cannot adj through kfs

[Ropariva]

[Ropariva]

Re: 5053ci Adj lead edge void

sorry found it, U402, i was looking in the wrong area of the manual.

too bad cannot adj through kfs

[fishleg]

Re: 5053ci Adj lead edge void

It's pretty nuts that 402 doesn't affect printing... Literally every single machine fuser wraps by default. No idea why you wouldn't have u402 affect everything. Would be the easiest thing in the world to sort I'd of thought.

U034 only one that helps but then you have to deal with centering issues so it's not ideal..

[buzz]

Re: 5053ci Adj lead edge void


Thank you so much, this cuts down my time immensely, I can imagine trying to go through this adjustment not getting what I really want. 👍🏻

Thanks for all the feedback!

[tmaged]

Re: 5053ci Adj lead edge void

Run it letter-R (landscape) or on 28# stock, is what I tell customers.

[ThisPete]

Re: 5053ci Adj lead edge void

I usually just use U415, that seems to be sufficient to stop most fuser wraps.

[Ropariva]

Re: 5053ci Adj lead edge void

I usually just use U415, that seems to be sufficient to stop most fuser wraps.