Kyocera TA 4551ci - dots on printing

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • max299x
    Junior Member
    • Dec 2022
    • 6
    #1

    Kyocera TA 4551ci - dots on printing

    Hello everybody,
    I have a Kyocera TA 4551ci which prints black and yellow dots on the sheet. I tried taking the drum apart and cleaning everything up but the result didn't change. Do you think the two color drum unit needs to be replaced?
    I attach a copy of a blank sheet.
    Thanks
    Attached Files
    Tags: 4551ci, dots, drum, kyocera, sheet
    • toddanderson
      Trusted Tech

      100+ Posts
      • Dec 2005
      • 234
      #2
      Re: Kyocera TA 4551ci - dots on printing

      Replace the charge rollers


      Originally posted by max299x
      Hello everybody,
      I have a Kyocera TA 4551ci which prints black and yellow dots on the sheet. I tried taking the drum apart and cleaning everything up but the result didn't change. Do you think the two color drum unit needs to be replaced?
      I attach a copy of a blank sheet.
      Thanks

        Comment

        • BillyCarpenter
          Field Supervisor

          Site Contributor
          VIP Subscriber
          10,000+ Posts
          • Aug 2020
          • 16308
          #3
          Re: Kyocera TA 4551ci - dots on printing

          Agree with Todd. To be sure, you need to measure between the dots. Your service manual has a chart that will tell you which part is the culprit.
          Adversity temporarily visits a strong man but stays with the weak for a lifetime.

            Comment

            • blackcat4866
              Master Of The Obvious

              Site Contributor
              10,000+ Posts
              • Jul 2007
              • 22973
              #4
              Re: Kyocera TA 4551ci - dots on printing

              You'll get 37.5mm intervals for the primary charge rollers. Once it starts doing this, it's pointless to clean the charge rollers.

              =^..^=
              If you'd like a serious answer to your request:
              1) demonstrate that you've read the manual
              2) demonstrate that you made some attempt to fix it.
              3) if you're going to ask about jams include the jam code.
              4) if you're going to ask about an error code include the error code.
              5) You are the person onsite. Only you can make observations.

              blackcat: Master Of The Obvious =^..^=

                Comment

                • max299x
                  Junior Member
                  • Dec 2022
                  • 6
                  #5
                  Re: Kyocera TA 4551ci - dots on printing

                  Thanks for your help

                    Comment

                    Previous template Next
                    Working...