Hello I was wondering if anyone knows anything about toner falling into the trays.
I have spoke with another technician about it, but he suggest it might be a developer issue.
The copier had a maintenance kit installed 3-4 months ago along with the waste toner assembly, and the feed drive pwb and motor.
The second issue is that it is unable to pickup paper from the other trays (2,3,4) MP and Tray 1 works.
Thank you!
When I tap the above area i notice the particles falling down into the cassette. I tried vacuuming it, but it seems like it is never ending.
Ooj5wqJiQIyalMEpQN7YPw.jpg
I have spoke with another technician about it, but he suggest it might be a developer issue.
The copier had a maintenance kit installed 3-4 months ago along with the waste toner assembly, and the feed drive pwb and motor.
The second issue is that it is unable to pickup paper from the other trays (2,3,4) MP and Tray 1 works.
Thank you!
When I tap the above area i notice the particles falling down into the cassette. I tried vacuuming it, but it seems like it is never ending.
Ooj5wqJiQIyalMEpQN7YPw.jpg
Comment