FYI CF610

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • madas
    Trusted Tech

    250+ Posts
    • Aug 2008
    • 313
    #1

    FYI CF610

    Hi all
    Error CF610 KM-3060, would not clear with reboot of m/c
    Told was resolved by doing Sim 989 HDD scandisk (I was not the tech so just basic info)

    madas
    Tags: 3060, accessing, clear, disk, hdd, hi all, info, km-3060, lef, reboot, resolved, restores, sim, tech
    • aabarnes1
      Senior Tech
      • Mar 2009
      • 620
      #2
      Did you format the HDD?
      Grant me the serenity to accept the things I cannot change.

        Comment

        • madas
          Trusted Tech

          250+ Posts
          • Aug 2008
          • 313
          #3
          Originally posted by aabarnes1
          Did you format the HDD?
          Hi, I did not do the work but was told they only used scandisk U989 and did not format the HDD.
          To format the disk you use U024.


          U989 HDD scandisk
          Description
          Restores data in the hard disk by scanning the disk.
          Purpose
          If power is turned off while accessing to the hard disk is performed, the control information in the hard disk

          drive may be damaged. Use this mode to restore the data.

          madas

            Comment

            • blackcat4866
              Master Of The Obvious

              Site Contributor
              10,000+ Posts
              • Jul 2007
              • 23008
              #4
              Thanks madas. I've been documenting cfxxx codes for a while now (since the manufacturer doesn't care to). Whenever you figure one out, please let me know. =^..^=
              If you'd like a serious answer to your request:
              1) demonstrate that you've read the manual
              2) demonstrate that you made some attempt to fix it.
              3) if you're going to ask about jams include the jam code.
              4) if you're going to ask about an error code include the error code.
              5) You are the person onsite. Only you can make observations.

              blackcat: Master Of The Obvious =^..^=

                Comment

                • madas
                  Trusted Tech

                  250+ Posts
                  • Aug 2008
                  • 313
                  #5
                  Originally posted by blackcat4866
                  Thanks madas. I've been documenting cfxxx codes for a while now (since the manufacturer doesn't care to). Whenever you figure one out, please let me know. =^..^=

                  Hi Blackcat, no worries! all for the common good LOL

                    Comment

                    Previous template Next
                    Working...