TA 250ci E2770 error

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Larhal
    Semi Retired

    Site Contributor
    VIP Subscriber
    500+ Posts
    • May 2013
    • 541
    #1

    [Error Code] TA 250ci E2770 error

    Hi All,

    Little stumped here, We have a customer with a TA 250ci that has thrown an E code. E2770. Now we are Not Kyocera trained, Ricoh yes, but I cannot find this error code on the KYO site or in the service manual.

    Any help would be appreciated.

    Larhal
    Larhal

    Retired Part Time

    If all else fails read the Service Manual!

    If that fails, meet me at the pub and we will discuss it.
    Tags: None
    • copymech
      Trusted Tech

      100+ Posts
      • Sep 2011
      • 196
      #2
      Re: TA 250ci E2770 error

      If machine firmware is not current it may give wrong error codes.

        Comment

        • Larhal
          Semi Retired

          Site Contributor
          VIP Subscriber
          500+ Posts
          • May 2013
          • 541
          #3
          Re: TA 250ci E2770 error

          Firmware Ver. 13 , current.

          larhal
          Larhal

          Retired Part Time

          If all else fails read the Service Manual!

          If that fails, meet me at the pub and we will discuss it.

            Comment

            • Tonerkiller
              Senior Tech

              500+ Posts
              • Oct 2012
              • 665
              #4
              Re: TA 250ci E2770 error

              Look again, it is throwing a different code.

                Comment

                • Larhal
                  Semi Retired

                  Site Contributor
                  VIP Subscriber
                  500+ Posts
                  • May 2013
                  • 541
                  #5
                  Re: TA 250ci E2770 error

                  Hi All,

                  I was not the one to go to the unit, It was another tech, He emailed me the code and It was C2770, Transfer belt skew. Ok I know, it happen, Thanks for all your help anyway.

                  Larhal
                  Larhal

                  Retired Part Time

                  If all else fails read the Service Manual!

                  If that fails, meet me at the pub and we will discuss it.

                    Comment

                    • blackcat4866
                      Master Of The Obvious

                      Site Contributor
                      10,000+ Posts
                      • Jul 2007
                      • 22973
                      #6
                      Re: TA 250ci E2770 error

                      If you've got a C2770 you don't have a Saturn. That code didn't exist yet. You've got an Alphard I or Alphard II, probably a Venus. =^..^=
                      If you'd like a serious answer to your request:
                      1) demonstrate that you've read the manual
                      2) demonstrate that you made some attempt to fix it.
                      3) if you're going to ask about jams include the jam code.
                      4) if you're going to ask about an error code include the error code.
                      5) You are the person onsite. Only you can make observations.

                      blackcat: Master Of The Obvious =^..^=

                        Comment

                        • Larhal
                          Semi Retired

                          Site Contributor
                          VIP Subscriber
                          500+ Posts
                          • May 2013
                          • 541
                          #7
                          Re: TA 250ci E2770 error

                          Hi Blackcat,

                          In the service manual for the TA 250ci it shows that code, C2770 and is a transfer belt skew. It was do for a MK 865 A kit on the unit and when we did it the unit came back to life no issues.

                          Anyhow, Thanks all for your input.

                          Larhal
                          Larhal

                          Retired Part Time

                          If all else fails read the Service Manual!

                          If that fails, meet me at the pub and we will discuss it.

                            Comment

                            • Paddy
                              Junior Member
                              • Jun 2013
                              • 9
                              #8
                              Re: TA 250ci E2770 error

                              Hi,

                              did some Research.

                              In the Service Manual from Ta 250ci, there's no E2770 Error been noticed.
                              "blackcat4866" was right on this. It might be the Zeus Series.

                              Checked the Service Manual from TA 6500i.
                              Here's what i found:

                              E2770.jpg

                                Comment

                                • Larhal
                                  Semi Retired

                                  Site Contributor
                                  VIP Subscriber
                                  500+ Posts
                                  • May 2013
                                  • 541
                                  #9
                                  Re: TA 250ci E2770 error

                                  I looked again, I found that my service manual, 3 ring binder type, has had some pages removed and replaced. The series numbers for the manuals are not the same on the top of the pages. ERRRRFFFFF!!!!
                                  Got to keep my associates out of my stuff.

                                  Anyhow. the MK A kit resolved the issue. Unit is up and running.

                                  I hate it when people misuse my stuff, now I have to look through all my manuals and see what pages are not correct.

                                  I stand corrected and thanks again.

                                  Larhal
                                  Larhal

                                  Retired Part Time

                                  If all else fails read the Service Manual!

                                  If that fails, meet me at the pub and we will discuss it.

                                    Comment

                                    • Scott
                                      Trusted Tech

                                      Site Contributor
                                      100+ Posts
                                      • Dec 2009
                                      • 190
                                      #10
                                      Re: TA 250ci E2770 error

                                      I cant find anything for the 250ci but here is the same code for the 3050ci...

                                      WEBSITE.WS - Your Internet Address For Life™
                                      http://www.officeland.ws/CS3050ci-3550ci-4550ci-5550ciENTB3_w.pdf

                                        Comment

                                        • Tonerkiller
                                          Senior Tech

                                          500+ Posts
                                          • Oct 2012
                                          • 665
                                          #11
                                          Re: TA 250ci E2770 error

                                          What is a 3 ring binder?

                                            Comment

                                            Previous template Next
                                            Working...