Does anyone has the procedure for clearing a C610 fuser error on a mita KM-1810. Thanks
-
-
Burned out / broken fuser lamp.I know what I know better than anyone else knows what I know. -
When you solve your fuser problem, you can reset fuser errors with sim 163.If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
Harumph!I know what I know better than anyone else knows what I know.Comment
-
But just think of all the knowledge you'll get from a manual. It could be the best $11.77 you've ever spent.
Paul@justmanuals.comComment
-
Hey, Executing maintenance, Press stop/reset key, start key, and the left copy exposure adjustment key in the order presented and hold them down. press the stop/reset key. and select the sim mode of 163 press start. that,s it brother!!Comment
-
Some of the posts i read seem to be from "users" trying to repair, not technicians. Trained technicians should not need to ask for basic information such as how to enter service modes and reset codes. I thought this forum was for "techs" to trade ideas when they are stuck on a problem. Sorry if I offend anyone.Comment
Comment