MPC2504ex Sc843-02

[Popolopo]

Check the manual, SC843-02 say panel eMMC already rewrote threshold. Any way to reset it, instead of replacing the whole panel?

[mfrigault]

See bulletin...

[Popolopo]

See bulletin...

Well, the bulletin and manual say to replace it. I asking if there's a way to reset it. For example, we can format hardisk, can we do the same with the eMMc?

[slimslob]

Well, the bulletin and manual say to replace it. I asking if there's a way to reset it. For example, we can format hardisk, can we do the same with the eMMc?

There is no HDD or SSD on the Smart Operation Panel. If I were an android software engineer and had a complete set of the OS as implemented on the SOP, I might be able to reverse engineer it and come up with a way to clear the registers. Minimum charge to do so would be at least $5,000.00 and you would have to send the SOP to me to work on in my lab. It would most likely take 2 to 3 weeks.

If you get really lucky Hytec Dealer Services might have already developed a method for their lab to fix the problem.

[Popolopo]

There is no HDD or SSD on the Smart Operation Panel. If I were an android software engineer and had a complete set of the OS as implemented on the SOP, I might be able to reverse engineer it and come up with a way to clear the registers. Minimum charge to do so would be at least $5,000.00 and you would have to send the SOP to me to work on in my lab. It would most likely take 2 to 3 weeks.

If you get really lucky Hytec Dealer Services might have already developed a method for their lab to fix the problem.

Man. Ricoh really plan for obsolescence. Like it or not, need to buy new parts or machine.

[luca72]

There is no HDD or SSD on the Smart Operation Panel. If I were an android software engineer and had a complete set of the OS as implemented on the SOP, I might be able to reverse engineer it and come up with a way to clear the registers. Minimum charge to do so would be at least $5,000.00 and you would have to send the SOP to me to work on in my lab. It would most likely take 2 to 3 weeks.

If you get really lucky Hytec Dealer Services might have already developed a method for their lab to fix the problem.

It would be interesting to understand if there is a way to visualize the status of the R/W cycles before it reaches the limit

[copier tech]

Check the manual, SC843-02 say panel eMMC already rewrote threshold. Any way to reset it, instead of replacing the whole panel?

Have you tried updating the SOP cheetah firmware & performing a hard reset ?