Rioch Aficio MP C2050 does not detect paper in any tray even though the paper is in.
Rico Aficio MP-C2050 Does not detect paper in any tray
Collapse
X
-
Check SP 5803-52 Tray 1 and SP 5803-53 Tray 2. They should be 0 when the tray in closed. If I remember correctly, the tray set switch is part of the paper size switch for each tray. Also Ricoh had a problem with tray latch mechanism causing the trays to not be held closed properly resulting in the tray not being detected as set.Comment
-
Check SP 5803-52 Tray 1 and SP 5803-53 Tray 2. They should be 0 when the tray in closed. If I remember correctly, the tray set switch is part of the paper size switch for each tray. Also Ricoh had a problem with tray latch mechanism causing the trays to not be held closed properly resulting in the tray not being detected as set.
I had the problem of not latching the tray and getting this error, where is the tray latch sensor please?Comment
-
It is not a sensor. It is a plastic part of the tray that breaks off. You either have to replace the tray or see if the repair kit is still available. There was a bulletin on the repair kit.👍 1Comment
-
👍 1Comment
-
in that model the drawer lock systematically breaks, try pushing the drawer in with your knee, and see if the icon with the paper appear"I'll be back"👍 1Comment
Comment