[Misc] Paper wrinkle on left side

[kanagavel]

I prepare one MPC 3002 fusing unit (pressure roller, flim, oil pad, lampholder all new) but wrinkle comes. I don't know how to solve this problem. If anybody knows please help me on this.

[slimslob]

Re: Paper wrinkle on left side

Are you sure the wrinkling is being caused by the fusing unit? More often than not it is something in the PTR section causing the paper to not enter the fusing unit correctly. The transfer case used with this model has a history of problems caused by plastic parts breaking. If the case has not been properly updated IAW BULLETIN NUMBER: D111/D142 – 021, you need to do so. If you put the newer style PTR in the old style case, you have introduced a misalignment. Yoou may also need to update the discharge plate in the paper transfer unit IAW BULLETIN NUMBER: D111/D142 – 022. Bulletins attached.
rfg056662.pdf
rfg056868.pdf

[copier tech]

Re: Paper wrinkle on left side

I prepare one MPC 3002 fusing unit (pressure roller, flim, oil pad, lampholder all new) but wrinkle comes. I don't know how to solve this problem. If anybody knows please help me on this.

Did the wrinkle only happen after you worked on the fuser unit?

[kanagavel]

Re: Paper wrinkle on left side

[QUOTE=copier tech;1970448][B]

Did the wrinkle only happen after you worked on the fuser unit?

Hi sir, thank you for your reply.
Yes the wrinkle happened after i worked on the fuser.
Actually why i did this fusing unit because the fusing flim torn so i change the flim together i change pressure roller also.
So now i don't know how to solve this wrinkle problem.
I try to upload the pics of wrinkle problem here but i couldn't.

[copier tech]

Re: Paper wrinkle on left side

[QUOTE=kanagavel;1974412]

[B]

Did the wrinkle only happen after you worked on the fuser unit?

Hi sir, thank you for your reply.
Yes the wrinkle happened after i worked on the fuser.
Actually why i did this fusing unit because the fusing flim torn so i change the flim together i change pressure roller also.
So now i don't know how to solve this wrinkle problem.
I try to upload the pics of wrinkle problem here but i couldn't.

Sounds like the pressure roller bearing is not it the correct position.

Did you replace a genuine Ricoh fuser sleeve unit or compatible ?

[kanagavel]

Re: Paper wrinkle on left side

[QUOTE=copier tech;1975054]

Sounds like the pressure roller bearing is not it the correct position.

Did you replace a genuine Ricoh fuser sleeve unit or compatible ?

Hi sir, i used compatible fusing sleeve and pressure roller also not original.
Sir one more thing I want to know can you please help me, is there any procedure or correct way or easy way to adjust the fusing pressure by manually because there got 2 springs for pressure adjustment can i try the adjustment for this wrinkle problem.

[slimslob]

Re: Paper wrinkle on left side

[QUOTE=kanagavel;1975178]

Hi sir, i used compatible fusing sleeve and pressure roller also not original.
Sir one more thing I want to know can you please help me, is there any procedure or correct way or easy way to adjust the fusing pressure by manually because there got 2 springs for pressure adjustment can i try the adjustment for this wrinkle problem.

Unless one or both of the springs are old and loosing their compression force there is nothing about the springs to cause wrinkling. If you really think it is the springs, then order two new springs from Ricoh. Do not use after market parts as the quality and consistency is not guaranteed. The same is true of the sleeve unit and the pressure roller. A warped sleeve frame will cause wrinkling. A non original pressure that is even the slightest different from one end to the other will cause wrinkling.

[kanagavel]

Re: Paper wrinkle on left side

[ATTACH]50779[/ATTACH]
[ATTACH]50780[/ATTACH]

Hi sir, thank you for your response. I think wrinkle problem because of the fusing unit. Because i use the other fusing unit in the same machine no wrinkle problem comes. When i use the fusing unit that prepared by me the wrinkle problem coming.

[slimslob]

Re: Paper wrinkle on left side

Hi sir, thank you for your response. I think wrinkle problem because of the fusing unit. Because i use the other fusing unit in the same machine no wrinkle problem comes. When i use the fusing unit that prepared by me the wrinkle problem coming.

Then order Genuine Ricoh either complete fusing unit or sleeve and pressure roller.

[bsm2]

Re: Paper wrinkle on left side

measure the distance of the screw to nut on the good unit.

Than adjust the one thats having the problem as close as you can.

[Phil B.]

Re: Paper wrinkle on left side

Hi sir, thank you for your response. I think wrinkle problem because of the fusing unit. Because i use the other fusing unit in the same machine no wrinkle problem comes. When i use the fusing unit that prepared by me the wrinkle problem coming.

If you bought a complete unit, I would contact the folks that put it together.
If you did, a good learning lesson.

Sent from my SM-G960U using Tapatalk

[slimslob]

Re: Paper wrinkle on left side

measure the distance of the screw to nut on the good unit.

Than adjust the one thats having the problem as close as you can.

What screw to what nut? There is no adjustment. When you don't know the model and have never work on them, don't make a fool of yourself. At the least you should check such things as the service manual and parts catalog before you post.

[GIUBOSS]

Re: Paper wrinkle on left side

Damp paper?

[mikadonovan]

Re: Paper wrinkle on left side

Since it only happened after you worked on it, just go ahead and disassemble it again. Reassemble paying attention to the details. We all have had to do this at one time or another, and you will likely discover what the malfunction is.