RICOH MPC 307

[esvesdin]

Hello my printer ricoh mpc 307 , always makes two passes even though I give him one-sided printing
any idea ?

[slimslob]

Re: RICOH MPC 307

Check to see if there is a setting for Face Up Exit. It will cause the machine to send the copy through the duplex unit to turn it face up.

[esvesdin]

Re: RICOH MPC 307

Check to see if there is a setting for Face Up Exit. It will cause the machine to send the copy through the duplex unit to turn it face up.

no exiting face down
greetins

[emiliorsg]

Re: RICOH MPC 307

The default printer driver comes double-sided. Change it.

[esvesdin]

Re: RICOH MPC 307

The default printer driver comes double-sided. Change it.

i change default printer to one side print that isnt the issue here
greetings

[anothertech]

Re: RICOH MPC 307

How does it work when you make a copy?

[esvesdin]

Re: RICOH MPC 307

How does it work when you make a copy?

in copy mode it works fine. The copy does not go to duplex.
greetings

[sandmanmac]

Re: RICOH MPC 307

in copy mode it works fine. The copy does not go to duplex.
greetings

100% this is driver setting issue. Figure it out. You're missing something. It's not the machine.
I've never, ever, heard of some other reason for this behavior
Anyone else?

[tsbservice]

Re: RICOH MPC 307

And what about kind of driver/connection? WSD install is always bad.
Use appropriate Ricoh driver for model and connectivity.
It's not the machine.

[esvesdin]

Re: RICOH MPC 307

100% this is driver setting issue. Figure it out. You're missing something. It's not the machine.
I've never, ever, heard of some other reason for this behavior
Anyone else?

It's not driver , I checked everything in detail and I'm using PCL 6 for a very long time so I'm pretty sure it's not driver
greetings

[esvesdin]

Re: RICOH MPC 307

And what about kind of driver/connection? WSD install is always bad.
Use appropriate Ricoh driver for model and connectivity.
It's not the machine.

connection is by IP adresss i'ts not by WSD Port and driver is PCL 6 from ricoh page
greetings

[tsbservice]

Re: RICOH MPC 307

connection is by IP adresss i'ts not by WSD Port and driver is PCL 6 from ricoh page
greetings

OK then I would probably do some machine reset, just in case.

[sandmanmac]

Re: RICOH MPC 307

It's not driver , I checked everything in detail and I'm using PCL 6 for a very long time so I'm pretty sure it's not driver
greetings

I'm standing my ground.
Try removing the driver....and entire driver package. Reinstall, and reconfigure.
The issue is on the PC end.
Have you tried another PC/ laptop or even your phone?
Heck, even Try a totally different driver. For example, PCL5c or even one for another machine like MP C305 or C306 (It's all PCL after-all)

[anothertech]

Re: RICOH MPC 307

Look in User tools, Machine settings, Printer. There is a setting in there that can be set to one sided or two sided.

[esvesdin]

Re: RICOH MPC 307

I'm standing my ground.
Try removing the driver....and entire driver package. Reinstall, and reconfigure.
The issue is on the PC end.
Have you tried another PC/ laptop or even your phone?
Heck, even Try a totally different driver. For example, PCL5c or even one for another machine like MP C305 or C306 (It's all PCL after-all)

I tried from another computer , even with another O.S. ( win 7 and win 8 )again the same , problem is there.I like the idea of an older driver and mobile aplication . I'm gona test it on monday olso I'm going to try with universal driver or maybe to see if there some firmweare update
greetings