Clear Transfer belt replacement message MP C4503

[Samanator]

I need to clear the 'Transfer Belt Replacement' message on a MP C4503.

How is that done?

Thanks in advance for the information.

[slimslob]

Re: Clear Transfer belt replacement message MP C4503

Follow the replacement procedures in the service manual.

[Samanator]

Re: Clear Transfer belt replacement message MP C4503

Thank you slimsbob.

If I had a service manual, I certainty could do so.

However, I do not wish to replace the transfer belt, I just wish to turn off the message.

[mikadonovan]

Re: Clear Transfer belt replacement message MP C4503

SP mode. If there is a tab that says PM counter/New unit set, do it in there. If not, go to system>data log>pm counter reset.

[slimslob]

Re: Clear Transfer belt replacement message MP C4503

Thank you slimsbob.

If I had a service manual, I certainty could do so.

However, I do not wish to replace the transfer belt, I just wish to turn off the message.

PM me with an email address.

[anothertech]

Re: Clear Transfer belt replacement message MP C4503

Funny, I don't recall ever seeing that message on one of those machines.

[slimslob]

remote Re: Clear Transfer belt replacement message MP C4503

Funny, I don't recall ever seeing that message on one of those machines.

There is a SP setting that can be used to Enable or Disable PM due messages. We usually disabled it and just depended on monthly meter readings to determine when a PM was due.

[emiliorsg]

Re: remote Re: Clear Transfer belt replacement message MP C4503

There is a SP setting that can be used to Enable or Disable PM due messages. We usually disabled it and just depended on monthly meter readings to determine when a PM was due.

If my memory serves me correctly, I think that in those models it is deactivated from factory.

[copier tech]

Re: remote Re: Clear Transfer belt replacement message MP C4503

If my memory serves me correctly, I think that in those models it is deactivated from factory.

Yes this is off by default.

Enter SE mode on the first screen choose PM counter you can disable the message here.

If you don't see this option you can update the firmware to show the PM counter page.

[luca72]

Re: remote Re: Clear Transfer belt replacement message MP C4503

If my memory serves me correctly, I think that in those models it is deactivated from factory.

only the sleeve of the fuser, are activated

[slimslob]

Re: remote Re: Clear Transfer belt replacement message MP C4503

If my memory serves me correctly, I think that in those models it is deactivated from factory.

It has been over 6 years since that model was discontinued. That's ample time for some idiot to activate it.

[UNICORNico]

Re: Clear Transfer belt replacement message MP C4503

I'm not going to lie to you, in my company, we activate some PM in clients who are not Maintenance, but who have a clear view that they have to prepare the money for the repair and don't wait for it to break xD hahaha.