Problem ricoh mp402 in print. Urgent.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • tullio
    Trusted Tech
    • Feb 2012
    • 268

    #1

    Problem ricoh mp402 in print. Urgent.

    Screenshot_20240217_221650_WhatsApp.jpg

    print with white tiga. also in copy. total counter 21000.
    new drum.
  • slimslob
    Retired

    Site Contributor
    25,000+ Posts
    • May 2013
    • 37052

    #2
    Re: Problem ricoh mp402 in print. Urgent.

    Is the paper fed LEF or SEF.
    If LEF you may have a problem with the registration roller/clutch
    If SEF check the side rails in the paper tray.

    Comment

    • davel
      Technician

      1,000+ Posts
      • Oct 2011
      • 1089

      #3
      Re: Problem ricoh mp402 in print. Urgent.

      Clean the LED array.

      Comment

      • KeviM
        Trusted Tech

        250+ Posts
        • Oct 2019
        • 324

        #4
        Re: Problem ricoh mp402 in print. Urgent.

        It's a small straightforward A4 black and white machine. Most likely culprit is , drum unit, Dev unit, LED array / laser unit.

        Drum unit and Dev unit is very easy to check. Just open the front door and slide out. While you doing that just check for a build up dirt and toner inside the machine and clean it out.


        It's a decent machine and works fairly well

        Comment

        • anothertech
          Service Manager

          Site Contributor
          1,000+ Posts
          • Nov 2007
          • 1757

          #5
          Re: Problem ricoh mp402 in print. Urgent.

          Originally posted by davel
          Clean the LED array.
          Yep, dirty LED array. Ricoh put a nice cleaning brush on the IM350 model just for this problem.

          Comment

          • tullio
            Trusted Tech
            • Feb 2012
            • 268

            #6
            Re: Problem ricoh mp402 in print. Urgent.

            ok. I'll do these tests. I'll update you. Thanks.

            Comment

            • sandmanmac
              Field Supervisor

              Site Contributor
              2,500+ Posts
              • Feb 2009
              • 3973

              #7
              Re: Problem ricoh mp402 in print. Urgent.

              Originally posted by davel
              Clean the LED array.
              Urgent??!
              C'mon Man!
              It's the Simplest thing imaginable and you haven't even done it.
              100% this is the issue.

              Comment

              • Codex
                Senior Tech

                500+ Posts
                • May 2008
                • 694

                #8
                Re: Problem ricoh mp402 in print. Urgent.

                [QUOTE=tullio; 2583255]
                Memento Audere Semper

                Comment

                • JayPaul
                  Trusted Tech

                  250+ Posts
                  • Oct 2012
                  • 305

                  #9
                  Re: Problem ricoh mp402 in print. Urgent.

                  This job is so simple I made a HOW TO guide for customers to carefully clean it. Saved me many call outs, until the PCDU starts causing lines etc then obviously I have to go out replace, update firmware and clean LED flip down section.
                  Would only recommend if you trust the customer enough though, there are some I can't trust to even change a toner on this model

                  Comment

                  • tullio
                    Trusted Tech
                    • Feb 2012
                    • 268

                    #10
                    Re: Problem ricoh mp402 in print. Urgent.

                    Resolved. defective drum. thank you very much for helping.

                    Comment

                    • luca72
                      Field Supervisor

                      1,000+ Posts
                      • Oct 2017
                      • 1711

                      #11
                      Re: Problem ricoh mp402 in print. Urgent.

                      Originally posted by slimslob
                      Is the paper fed LEF or SEF.
                      If LEF you may have a problem with the registration roller/clutch
                      If SEF check the side rails in the paper tray.

                      I would also have bet me too on the registration clutch!...they are undersized, and I changed one recently on that model
                      "loneliness is an invention of the white man, when we are alone we talk to everything around us, we are never alone" (Ojibwa)

                      Comment

                      Working...