MPC-3502 sc554-00(holy sh..!)

[Zeldaman]

Hi there!20121112_140537.jpg

[SargeNZ]

Re: MPC-3502 sc554-00(holy sh..!)

Did you try SP 5-810 to clear the SC code before swapping boards around? If it was a failure out of the box it should be worth chasing warrantee.

[Eric1968]

Re: MPC-3502 sc554-00(holy sh..!)

Did you try SP 5-810 to clear the SC code before swapping boards around? If it was a failure out of the box it should be worth chasing warrantee.

x2

Resetting a Fusing Unit error by changing the BICU and NVRAM... That's also a way to solve it....

[Llama God]

Re: MPC-3502 sc554-00(holy sh..!)

You need to order the complete fuser unit as a spare part. These units have a fuse in that blow and enable the second option in SP5810.

Alternatively, replace the Eeprom (NVRAM) and repair the fuser. Then, once this is working, back up the NVRAM data (this can be used to restore a "good" copy of the NVRAM data later.)

The best advice I can give is to back up the NVRAM data on all of your MP/MPc**02 machines and the MPc305.

I feel your pain, I've been through this shitstorm.

[Zeldaman]

[Llama God]

Re: MPC-3502 sc554-00(holy sh..!)

The error is stored on the EPROM, hence it reappearing. You don't have to replace the BICU, this confuses me.

[TonerMunkeh]

Re: MPC-3502 sc554-00(holy sh..!)

We've been instructed to take backups of all MPC4502/5502 NVram's at install. Apparently then the fix is to replace the fuser and reload the good NVram data.

[Llama God]

Re: MPC-3502 sc554-00(holy sh..!)

We've been instructed to take backups of all MPC4502/5502 NVram's at install. Apparently then the fix is to replace the fuser and reload the good NVram data.

That's what I said earlier on, the BICU thing is what I'm confused about.

How's it going, sugar tits?

[TonerMunkeh]

Re: MPC-3502 sc554-00(holy sh..!)

One sentence basically describes it - same shit, different day. Hope the situation's improved at your place anyway.

[Llama God]

Re: MPC-3502 sc554-00(holy sh..!)

One sentence basically describes it - same shit, different day. Hope the situation's improved at your place anyway.

Nope.

[Sweden_GBG]

[Llama God]

Re: MPC-3502 sc554-00(holy sh..!)

This is exactly what you should do, you're right.

[Llama God]

Re: MPC-3502 sc554-00(holy sh..!)

These are the documents you need:

[Sweden_GBG]

Re: MPC-3502 sc554-00(holy sh..!)

This is exactly what you should do, you're right.

Or found a way to make a new fuse to the old fuser? (blows when first start up).

[Llama God]

Re: MPC-3502 sc554-00(holy sh..!)

Well yes, you can try.

You can get the spare parts as you can with previous fusers, so that would be the way forward as long as you have the NVRAM data.