samsung 6345 jamming

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • billykid18
    • May 2025
    #1

    samsung 6345 jamming

    I am working on a samsung 6345 and i'm not familiar with these at all... the lead edge goes just beyond the fuser and it stops every time... all the sensors visible seem to be fine...I think it stems from the registration area just beyond the feed...any feed back on issues down there before I rip it all apart??? I think that is where the problem is...anyone have problems with this area???Thanks
    Tags: 6345, jamming, lead edge, ops, samsung
    • DHTHOMP
      #2
      Re: samsung 6345 jamming

      Change the fuser sensor flag its warped due to heat buildup from fuser unit.

        Comment

        • blackcat4866
          Master Of The Obvious

          Site Contributor
          10,000+ Posts
          • Jul 2007
          • 22932
          #3
          Re: samsung 6345 jamming

          What jam codes? =^..^=
          If you'd like a serious answer to your request:
          1) demonstrate that you've read the manual
          2) demonstrate that you made some attempt to fix it.
          3) if you're going to ask about jams include the jam code.
          4) if you're going to ask about an error code include the error code.
          5) You are the person onsite. Only you can make observations.

          blackcat: Master Of The Obvious =^..^=

            Comment

            • copytechman
              Senior Tech

              Site Contributor
              500+ Posts
              • Nov 2008
              • 926
              #4
              Re: samsung 6345 jamming

              Also seen the sensor itself fail as it's right above the fuser and that type in particular seems to be rather heat failure prone!

              Regards!
              A.

                Comment

                • JustManuals
                  Field Supervisor

                  5,000+ Posts
                  • Jan 2006
                  • 9838
                  #5
                  Re: samsung 6345 jamming

                  Only 3 years too late.

                    Comment

                    • copytechman
                      Senior Tech

                      Site Contributor
                      500+ Posts
                      • Nov 2008
                      • 926
                      #6
                      Re: samsung 6345 jamming

                      Ooops! Didn't notice the date! Dooooh!

                      My bad!
                      A.

                        Comment

                        Previous template Next
                        Working...