Sharp 1661 cs SYSTEM ERROR LI-00

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Pantylotion
    Technician
    • Dec 2008
    • 15

    #1

    Sharp 1661 cs SYSTEM ERROR LI-00

    can anyone tell me what this error relates to?
  • ZOOTECH
    Senior member of CRS

    Site Contributor
    2,500+ Posts
    • Jul 2007
    • 3375

    #2
    Your scanner lock-down is engaged. It's located under the optic area at the front left corner.
    "You can't trust your eyes, if your mind is out of focus" --

    Comment

    • Pantylotion
      Technician
      • Dec 2008
      • 15

      #3
      would this cause the machine to make a noise when trying to copy? also im looking for a good sharp parts dealer any suggestions?

      Comment

      • tmaged
        Owner/Service Manager

        Site Contributor
        1,000+ Posts
        • Oct 2008
        • 1867

        #4
        L1-00 means the scanner never left the home position sensor. As was stated, the most common problem was inadvertantly locking the scanner. You can run the scanner in 1-1, or just move it with your hand.
        Hope that helps !
        -Tony
        www.dtios.com
        Become a fan on Facebook

        Comment

        • Vlad
          Technician
          • Mar 2008
          • 23

          #5
          Tmaged is right - this happened many times to me, I phone troubleshoot it. Sometimes it takes cleaning and oiling the metal rod the scanner rides on (rear fram side). Good luck.

          Comment

          • OMD-227

            #6
            If the machine is in a nice, clean environment, remove the lock-down clip totally..... you will never have this issue again. It only leaves a small hole on the underside of the scanner that no-one will even notice..... little chance of dust entering scanner unit if in a good environment. Your choice. Most machines here in Australia seem to have them removed during run-up. Those that dont, will eventually have this error.

            Comment

            • nilsonmorales

              #7
              sharp bulletin

              saludos desde el salvador
              nilsonmorales@hotmail.com

              Comment

              • chakiris
                Technician
                • Apr 2008
                • 22

                #8
                If the trouble L1 still occurs, then it will be on the main PWB. There's a technical bulletin from Sharp for the repair on this particular trouble.

                Comment

                • kbrilliant

                  #9
                  Re: sharp bulletin

                  Originally posted by nilsonmorales
                  saludos desde el salvador
                  nilsonmorales@hotmail.com
                  I appreciate this PDF documentation you've posted. It will help me troubleshoot the [li-00] system error.

                  Comment

                  • JustManuals
                    Field Supervisor

                    5,000+ Posts
                    • Jan 2006
                    • 9838

                    #10
                    Re: Sharp 1661 cs SYSTEM ERROR LI-00

                    This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from


                    Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


                    Paul@justmanuals.com

                    Comment

                    Working...