MX3110 special sims

[Akitu]

Re: MX3110 special sims

We have reason to believe otherwise, as posted, I was told there was special firmware involved, and others have heard other things. We'll figure it out one way or another...

[mojorolla]

Re: MX3110 special sims

There can only be 38,416 combinations with four keystrokes in the sequence.
Let the fun begin!

[Akitu]

Re: MX3110 special sims

Does it lock you out after so many incorrect guesses? If not then someone could launch a brute force attack through VCN and have the code within minutes.

[mojorolla]

Re: MX3110 special sims

At the machines, you get 5 guesses before the machine locks. I am not sure about VNC though....

[igi]

Re: MX3110 special sims

hi all
what happens when it locks up
is there a way to unlock?

[Akitu]

Re: MX3110 special sims

hi all
what happens when it locks up
is there a way to unlock?

Not having tried it, I would have to assume maybe a 10-30 minute lockout timer.

[igi]

Re: MX3110 special sims

Not having tried it, I would have to assume maybe a 10-30 minute lockout timer.

sweet

[mojorolla]

Re: MX3110 special sims

There is a "Release Machine Lock" button in the web page. I don't remember off the top of my head where, but I want to say in the security settings.

[Akitu]

Re: MX3110 special sims

I believe that one is for user authentication purposes when a user locks themselves out trying to guess their own passwords...

[tmaged]

Re: MX3110 special sims

There is a "Release Machine Lock" button in the web page. I don't remember off the top of my head where, but I want to say in the security settings.

That's only for files that had the incorrect password three times. They are then greyed out, until they are released. At that point the admin can delete them if the code is forgotten.

[mojorolla]

Re: MX3110 special sims

I had some rare, free time today and attempted to VNC the combinations to the machine. The lag over the network made it clear this would not work; a crossover would probably be just as clunky.

[Akitu]

Re: MX3110 special sims

Maybe it would be better to try on a 4111/5111? I hear they support gigabit lines...

[igi]

Re: MX3110 special sims

I may have an answer for you later today, provided nobody beats me to it. Will respond with the command as soon as I have it, if I get it.

hi
any luck yet

[manjunathskm]

Re: MX3110 special sims

hi
all
unfortunatly i am in the same boat like the rest of you guys,
on all the previous models was no problem to get the secret sims,
but on this range i tried to figure it out for a week,still no succes.

It's True my friend. Sharp doesn't want Third Party players to Reset the Meter Reading and re-sell the used m/cs. But, again we, authorized dealers are unable

to reset the counters of Demo m/cs in the Show Rooms as well as the m/cs sent out for the Demo for a day or two especially for the Tenders. We are stuck.

[Akitu]

Re: MX3110 special sims

I don't see why anyone should be resetting copy counters, regardless of whether the machine went out on tenders or demo. It's just underhanded, it would be like resetting the odometer on a car lot after every test drive.