Can someone help me? I have this error. I replaced the hdd but it still doesn't work.
-
-
So you installed a HDD. Did you format it, etc, etc, etc?If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^= -
yes I formatted it but I also tried to format the root partition and I get authentication err..... and when I want to install the system software I get error F106_0Comment
-
F106_0 is "ADI-HDD error: Illegal disk replacement detected (ADI-HDD Exchange to SATA-HDD)"
Meaning you are trying to use a regular SATA HDD instead of the special Toshiba encrypted ADI-HDD which the machine won't allow.No, I will not send you Manuals, Software or your own little repair Genie to fix all your problems for you.
Comment
-
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
He means the drive itself must say "Wipe Technology HDD" like in the yellow area of this image, no other drive will work.
wipehdd.pngNo, I will not send you Manuals, Software or your own little repair Genie to fix all your problems for you.Comment
-
There is a way to replace the ADI disks with normal disks, I can help you with this, but of course I cannot share this information with you for free.Comment
-
No. On the original EB-X machines, before they introduced the ADI drive, you could swap it for a regular drive, but once it had an ADI drive, you cannot go back to a non ADI
drive. If the machine came with, or had a HDD replaced with an ADI drive, you can't swap a non ADI drive.Comment
-
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
I tried a new one and it doesn't work.Comment
-
No, I will not send you Manuals, Software or your own little repair Genie to fix all your problems for you.Comment
-
I replaced it with a good hdd but now I have another problem, the transfer belt is not spinning.Comment
Comment