Xerox 700 paper getting stuck 1/2 way in the Fuser

[georgeact]

I have an old Xerox 700 and when I print the paper get stuck in the middle of the fuser so obviously half printed. I thought it's the fuser and purchased a new fuser but it still getting stuck in the same exact position. Any insights/tips will be highly appreciated.

Please see the video below for more info.

IMG 5481 - YouTube

[xcopytech]

Re: Xerox 700 paper getting stuck 1/2 way in the Fuser

It good idea to post jam code which you got so we can help you

[georgeact]

Re: Xerox 700 paper getting stuck 1/2 way in the Fuser

Thanks for your reply. Code is 077-909

[Detonation]

Re: Xerox 700 paper getting stuck 1/2 way in the Fuser

Do you have access to a decurler assembly ? Might be worth to exchange and see what thatt does. Also check the connectors on the back of the drawer and in the machine for bent pins or paper pieces.

[georgeact]

Re: Xerox 700 paper getting stuck 1/2 way in the Fuser

Do you have access to a decurler assembly ? Might be worth to exchange and see what thatt does. Also check the connectors on the back of the drawer and in the machine for bent pins or paper pieces.

[xcopytech]

Re: Xerox 700 paper getting stuck 1/2 way in the Fuser

077-909 mean that some of sensor is acivated.
There is procedure is service manual to check proper NVM and seee which sensor

[zagrex]

Re: Xerox 700 paper getting stuck 1/2 way in the Fuser

IMG 5481 - YouTube

check paper size !!!!