If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Hello I have an mfc 7340 that generates a line when copying through the ADF. copying on glass is fine. Any ideas how to resolve this? Thanks a million.
When you use the adf, it passes the original over the small glass on the left. You have something on that glass that the scanner sees all the way thru the scan. Could be white out, ink etc. Find that and you'll solve your problem.
Comment