User Profile

[Synthohol]

its probably your USB. konicas can be really picky.
or the front usb is plugged into the wrong slot on the MFPB.
4 gb drives work best if...

[Synthohol]

did you let it reboot by itself 3 times? then you should get a 390 code IIRC then hit restore data.
ive never gotten a used board to work in another...

[Synthohol]

it likely wont do shit though, machine is incapable of using current security protocols.
even 10 years ago when gmail upgraded it's security it...

[Synthohol]

the sensor may be fine but the material its reading is probably trash. like a bad dv unit/developer mix.
aftermarket toner is usually to blame....

[Synthohol]

did you know you can buy it with the link in the quote you just posted?

[Synthohol]

ive seen it dozens of times, try a Ricoh driver on Konica, you're lucky it stopped at only 3000
check job log and find whose driver needs up...

[Synthohol]

yeah physical format is rarely needed, i just hook to my PC and make 1 unformatted partition.
once in copier it asks to logical format in admin...

[Synthohol]

KM, i used to be bothered by free advertising here going back to Paul's days (JustManuals) then he passed away and even CT for a short while, then i realized...

[Synthohol]

IIRC, about half a decade ago google stopped the ability to use google hosted domains email and most of us just create a personal gmail just for the copier...

[Synthohol]

all i can think of is replace the dv units under warranty, vacuum out the sub hopper and start fresh with oem toner and oem dv unit....

[Synthohol]

swap the cyan and magenta drum and DV units, put tape over the hole so it wont add the wrong color, keep the toner door open so it wont try to add any...

[Synthohol]

^^he can help^^

what version was on it? was it real xx4 fw or the fake "e" emulating FW?
i think it makes a big differen...

[Synthohol]

because its so old and and new windows it would be easier just to scan to a flash drive right from the panel and bring it to your PC

the...

[Synthohol]

yes there is, in service mode set sleep to "permit" and you will have the option to turn sleep off completely from System 1.
9.4 Sleep...

[Synthohol]

try locking down the speed to 100tx full duplex, disable sleep mode completely and assign a static IP if set to dhcp.

[Synthohol]

was the text originally rich black?
just for kicks print it selecting greyscale, if it lightens up its probably composite black instead of pure...

[Synthohol]

PM sent

[Synthohol]

the fiery driver will have all the options the emperon driver does afaik, is it setup correctly for LPR with Print as the queue name? enabled 2 way communication?...

[Synthohol]

email transfer failure?

what is listed in the log?...

[Synthohol]

ok, i download poweriso and use it to emulate a virtual cd/dvd with the ISO file so it opens as a disk. you can burn one from the iso too, i just dont...