Usually the backup roll ( inside the IBT asssy ) is worn out and there is different pressure between inboard and outboard sides of paper.
After...
User Profile
Collapse
-
What is the problem with machine and what system software version is on it?...Leave a comment:
-
Sorry but what is the pressure direction? Can you post image of the print?...Leave a comment:
-
-
This method works if the donor machine was at the same software level as the machine you want to to put it into operation.
If not, then you must...Leave a comment:
-
-
What mean rewrite sd card and hdd? Did you format the hdd? Did you used original files for C8030 or files copied from another machine?...Leave a comment:
-
You must have the service manual because here are many causes for this defect and several printer components must be checked....Leave a comment:
-
Usually in the right side of one of the A3 size tray it is there an compartment where a usb stick is located. With the printer turned off from both buttons,...😀 1Leave a comment:
-
No activity results to display
Show More
Leave a comment: