We are working on a WC 4260 but same issues could be similar on a 4150 or 4250.
I have replaced the drum and the toner but still getting...
39 results in 0.0292 seconds.
-
Can I test the high voltages?
-
WC-4150: Toner not installed correctly
I just thought I would see if any of you had ideas on this error message: "toner not installed correctly" before going out to check the issue.... -
4150 strange uncopied stripes only when using the DADF
Has anyone seen this before or have an idea what is going on?
Problem seems to be with scanner section and only occurs when using the document... -
copy starts getting darker with grey background
Customer's WC 4150 works fine when first powered on but the background which should be white starts to get more and more grey as more copies are made.... -
Canon IRC3380 E0748-4150
Hello, in my machine Canon IRC3380i i get the error code E0748-4150 in a black screen when booting up.
I have tried to remove the memories... -
WC 4150 - copies darken with quantity
Customer complained that first copies are fine, but as more and more are created they get too dark. Could this be a sign that the drum needs to be replaced?... -
WC 4150 - Toner Seal Not Removed
After several copies this 4150 gets an error message that the toner seal is not removed..tried a different toner and drum from a working copier and still... -
Xerox Workcentre 4150, Paper Jam "Open Side Door"
Everytime I turn on my Workcentre 4150 it Jams up when it prints the test print which usually prints everytime it is turned on. Even after removing the... -
WC 4125 Touch Screen Calibration Shortcut?
While calibrating the touch screen in the service mode the power went out and now the touch screen is way out of calibration. I figured out how to navigate... -
xerox 4150 message on UI ''job not accepted''
Message on UI ''job not accepted''.When the start print is pressed, the display will blink and back to ''ready''.After pressing thestart print... -
-
Tell machine not to print when it receives a fax.
Hey,
I have a Xerox Workcentre 4150. I set it up to auto-forward all faxes that i receive to my email address. Now, since i recieve the faxes... -
Xerox wc 4118 taking forever to come to ready
I have a 4118 that takes a long time to warm up. We have replaced the fuser and problem still there. Any help? I also have a xerox 4150 that does not... -
WC 4150 - Firmware Upgrade - Invalid file name/path
Hello Forum,
I have recently acquired a Xerox WC 4150 (rev.01, manuf. 2008) and run into a problem upgrading the firmware.
Current... -
Xerox 4150 error remove seal tape from cartridge and reinstall
I am getting a error remove seal tape from cartridge and reinstall.
There is no tape on the cartridge and I understand that there is a service...
