49 results in 0.0245 seconds.
-
How to adjust the development bias on TA 3010
Hello, I have a Taskalpha 3010i that the Bias is of (Slight black glow behind letters). There is no auto adjust on SIM 140 and they provide no instruction... -
Xerox C560
Is this a dev bias issue?
replaced dev unit housing and is like this in all colours.
thank you in advance
... -
Calibration marks issue 508ci
On a 508ci
I get these calibration marks on the page for the first few pages than it cleans off, than returns.
I have replaced the transfer... -
D110 background
Hi all,
After some help please, getting a feathery wavy background on this machine (sample attached).
Tried swapping dev, transfer,... -
-
MP 7503 poor mage density
i have uneven density on printed paper,on left side lighter than the right side,any suggestion?can i increase the bias as in mp 2501,what the SP mode... -
Drum Wrapping
We have had a rash of paper getting sucked up in the drum carriage lately, seems to be only on humid days and only on 2 sided copies. I have had 5 of... -
C20 Print Quality Issue
Have a constant dirt on prints, as if transfer belt is not cleaning properly. However it does clean properly. All IU drums are pristine clean. suspecting... -
MPC3501- poor quality colour.
This is only out of the box, 1,220 b/w and 780 colour, and the colour prints/copies are very poor. Done the reg/acc, checked bias etc. Can't get a good... -
savin 9965
Why is this one always going light on me after a week or so. Washed out. Tone it up and recalibrate dev. And it works for a while but comes back. Changed... -
Light copy
kyocerra mita 4030 light copy problem what too do bias full stting
please tell me setting for that -
Ricoh Aficio 1075 Changes Development Bias Voltage itself
Got one copier Ricoh aficio 1075. It changes development bias voltage itself.
I changed to 550V and it changed to 680 itself.
Can someone... -
nashuatec 6005
got a problem in nashuatec 6005, evrytime i set a Grid Bias changed or lowered, it returnns to its recent value. the parameters i entered was back to... -
Km5530 lite copies? White spots
Had a KM5530 last week that was making lite copies. More specificlly, blacks don't seem to fill in well at all. I put an entire PM kit in it. Dev. unit.... -
Default HV adjustment Separation AC/DC & LD bias adjustment KM8050&5001
I need default HV adjustment Separation AC / DC & LD bias adjustment KM8050 & 5001 if there are of course the standard settings.
Thank...
